6LITEREATER

iTrader: (56)

I'm not understanding... Did you order seats and are waiting on them?

ls1CANTU

iTrader: (9)

I spoke with some one a while back and told him I was ready to buy and he said that he would call me back and haven't heard from him since. He had told me that y'all had 5 sets of seats and I told him that I would buy 2 sets.

y'all did my interior, white leather with red/black houndstooth

JakeFusion

iTrader: (7)

Thanks Mark for handling my issue with the tabs welded in upside down.

Bill Smoke

Just started a thread asking about the quality of these seats, I should have read this thread first. I think I'll stick with stock seats, or maybe find a nice set of Trans Am seats.

cancam99ss

iTrader: (8)

Sent an email

cancam99ss

iTrader: (8)

nothing on my email?

6LITEREATER

iTrader: (56)

Where did you send it? I have nothing... FWDing to Gil to call you cantu...

6LITEREATER

iTrader: (56)

Found you in spam... not near a calculator but it would simply be 15% off the 500 (so 5 x 15 for 75 off) + shipping (can't remember what the shipping is but it is the same for all 48 and listed on the site).

JakeFusion

iTrader: (7)

Thanks guys for taking care of the bracket issue. I'll have some pics of the seats installed next week once the new brackets arrive.

SCott5

iTrader: (40)

Here are mine. New brackets worked great. No trimming or anything needed to install these.

JakeFusion

iTrader: (7)

Did you use the spacers for the sliders? I wanted the slider mechanism to pull up, so I had to use the spacers for it to fit. Works well...

SCott5

iTrader: (40)

Yea I used the spacers. It sits a little high for me 6'3 so I was thinking of taking the sliders off and mounting right to the bracket but I am going to give it some time to see if I get used to it.

JakeFusion

iTrader: (7)

I'm 6'3" too... seems like it would sit lower, even with the spacers. I'll know when I get the brackets next week.

Btw, I only had 4 spacers, so I went and bought some oversized Grade 8 nuts for the other side.

SCott5

iTrader: (40)

The way the bracket sits the seat in the car it makes the seat higher Atleast that's the way it feels to me.

LetsRide

iTrader: (3)

Is there a way to convert my seats from a rotating **** to a pull lever to recline my seats?

Did you swap the factory seat sliders to your new brackets or are they universal sliders?

JakeFusion

iTrader: (7)

My brackets came in and look like yours, but the bolt holes don't line up. You said yours worked no problem? Do you have a pic of just the brackets installed?