Couple of beauty shots of the GMC
#1
TECH Apprentice
Thread Starter
Couple of beauty shots of the GMC
Just dumping some pics of my GMC. Took a few beauty shots of it and figured I'd post up a few. I haven't been on here in a minute. Nice to see the site is still pretty active!
The truck has been a little project of mine. Its basically a frame off resto, full Escalade interior, 5/7 drop on 20" snowflakes, longtubes, 3200 stall, Truck Norris cam etc etc. Painted it with all the panels off, and then wet sanded up to 3000 grit and buffed 3 times.
The truck has been a little project of mine. Its basically a frame off resto, full Escalade interior, 5/7 drop on 20" snowflakes, longtubes, 3200 stall, Truck Norris cam etc etc. Painted it with all the panels off, and then wet sanded up to 3000 grit and buffed 3 times.
The following 8 users liked this post by Tranz Zam:
89ThirdGenCamaro3310 (01-16-2024), capelajc (12-27-2023), DualQuadDave (12-26-2023), ramairjohn2000 (12-31-2023), strutaeng (12-27-2023), and 3 others liked this post.
#2
TECH Fanatic
I'm not a truck guy, but I would be proud to drive that one. Very nice.
#4
LS1Tech Administrator
iTrader: (3)
Join Date: Nov 2001
Location: Schiller Park, IL Member: #317
Posts: 32,317
Likes: 0
Received 1,751 Likes
on
1,251 Posts
Not a fan of the super low ride height or the very low profile tire sidewall for a truck, but the wheel choice works well and I LOVE the hood.
#5
TECH Apprentice
Thread Starter
I've always had lifted trucks, so I wanted to do something totally different. The truck has 275/40s on all four corners now, so there's still some meat on the sidewall.
The hood was pure luck. Had a buddy order two, and he thought he had the other pre sold, but the buyer backed out. Love a steel cowl hood!
#7
TECH Apprentice
Thread Starter
Also found a pic of what it looked like when I bought it. It was a Florida truck is whole life, so it's perfect underneath with absolutely zero rust, but the FL weather beat the hell out of the factory paint.
Trending Topics
#10
TECH Apprentice
Thread Starter
I searched high and low for a while before I found this one. I refused to start with a truck that needed rust repair, and it had to be a stepside. It's not easy, but they're out there!
The following users liked this post:
blackbyrd (12-31-2023)
The following users liked this post:
Tranz Zam (01-01-2024)
#12
Looks great. I like the steering wheel too
The following users liked this post:
Tranz Zam (01-26-2024)
The following users liked this post:
Tranz Zam (01-26-2024)