JasonWW

iTrader: (2)

Hey guys, I have a 99 T/A and I have always been minorly annoyed by those short ***** on the A/C (HVAC or climate) controls. There's nothing to grab on to.

I noticed MBA made some from billet aluminum but I thought they would look out of place in my car, plus they cost about $27 each.

So I did some digging around and found some better ones. They are the same shape as the camaro ***** but are the gray color like stock, are rubber coated like stock and light up orange like stock. They are the same ones from the 96-98 Pontiac Grand Am, part # 16204959. They run about $13 ea. from my local dealer and about $7-$8 from GM Parts Direct.

You have to file or grind off one little tab on the back side of it to slide it all the way on. Once done, it fits nice and firm like stock. Man, they feel a lot better, too.

I'll try and find one for the headlights next.

Jason

JasonWW

iTrader: (2)

I finally got some pics. See how much more grip you can get on them? Nice. Looks like factory as well.


Here's the old *****. Notice your fingers grip it in the middle which reduces your leverage.

FBDYLVR

iTrader: (14)

I like them, I really don't understand why the Camaros got better ***** than the T/As!

PongoX11

iTrader: (15)

Seriously, TAs got BETTER EVERYTHING!

(awaits flame)

BoneSS

iTrader: (9)

Nope, pretty much the truth. I envy your seats.

xpaciscool

i read somewhere that you can take off the rubber part, and it is clear underneath, and it glows red. Is that true, or are those aftermarket *****? Also are their any other aftermarket ***** that will fit our cars besides the mba ones??

JasonWW

iTrader: (2)

Not true.

The Camaro ***** can be done that way and end up blue.

There may be some other Pontiac ***** like that, but I don't know from what car they are from.

StoleIt

iTrader: (3)

hey we have to be able to brag about something

Mike98WS6

iTrader: (5)

Those ***** do look alittle better than the stock POS's. I might give it a try.

endo

If all GM ***** have the same mount, I'd highly recommend getting the ***** from an 2002 Escalade. I don't have any experience w/ F-bodies, but I did put these ***** in my '01 pickup (now sold), and I was very happy with them both in terms of looks and function.

JasonWW

iTrader: (2)

They are all different. I couldn't even find one **** that would slip right into place of the stock ones. The ones I ended up using had to have a small notch filed down on the rear.

The headlight was even tougher. I ended up using the same **** as above and cutting the shaft off, shortning it and glueing it back together.

rufretic

iTrader: (37)

I agree, thats why I now have camaro *****. Lucky for me they light up blue like the rest of my interrior lighting.

Derek98z

iTrader: (55)

very cool mod

PewterNHRA2001

iTrader: (1)

if you peel the rubber off the ***** from a 99 or up grand am they are clear/red underneath, during the day they are red, and at night they sorta red/orange. my friend has it done on his grand am and it looks real good. ill see this weekend if the grand am ones fit on my 01 trans am

JasonWW

iTrader: (2)

I'm pretty sure I checked those and they were not wanting to fit. But, let me know how far off they are if you think they will work. I'll look at the 99 up GA ***** myself if I can.

JackZ28

The Camaro ***** are clear underneath too, but at night it's horrific the way they light up.

Tranzaman00

Trans am ***** are white underneath the rubber

FBDYLVR

iTrader: (14)

I just picked up 4 of these from the local pick a part... man these are GREAT!!! All I had to do was cut off the little tab w/ a pair of wire cutters and sand it down smooth.

2MuchRiceMakesMeSick

Ive never seen anyone get so excited over *****.

FBDYLVR

iTrader: (14)

I ended up spending $2 for 4 *****... pulled them from a 96-ish Grand Am? or Grand Prix or something along those lines.