ssinserts ss emblems..
Thread Starter
TECH Resident
iTrader: (7)
Joined: May 2004
Posts: 861
Likes: 0
From: Merrillville,In (chicago)
ssinserts ss emblems.. SSinserts sells the stainless steel SS emblems for 28 dollars. does this include 4 S's or 2 S's.
That is damn expensive for 2 damn S's and i am not really too keen on spending that but if it is for 4 S's i will probobly buy them.
Any others offer these emblems?
I am looking for stainless steel and one stainless steel bowtie for the back.
thanks
louie
That is damn expensive for 2 damn S's and i am not really too keen on spending that but if it is for 4 S's i will probobly buy them.
Any others offer these emblems?
I am looking for stainless steel and one stainless steel bowtie for the back.
thanks
louie
I bought them from SS inserts, and its $28 for one side..so you only get 2 SS's i didnt know that until i bought them..but i really think it was well worth the money..i get tons of compliments on them.
I did contact him and he didn't sell the "SS". If he does now then he started making them after I requested some.
I also bought them from ssinserts and put them on the rear. I only wanted a pair and yes they are expensive. They are not polished stainless. They are mirrored stainless btw which dragonz28 pointed out to me. This means they have a coating on them so they have an actual mirror finish.
I was considering SS emblems from a Chevelle, but they would have cost nearly as much!
Brian
I also bought them from ssinserts and put them on the rear. I only wanted a pair and yes they are expensive. They are not polished stainless. They are mirrored stainless btw which dragonz28 pointed out to me. This means they have a coating on them so they have an actual mirror finish.
I was considering SS emblems from a Chevelle, but they would have cost nearly as much!
Brian
Thread Starter
TECH Resident
iTrader: (7)
Joined: May 2004
Posts: 861
Likes: 0
From: Merrillville,In (chicago)
yeah damn..but over 110 for 4 SS emblems is a little pricey. i will probobly go for it and buy them, but i wish dragon would make some.
ohh well it is something that i will have to consider.
it will be a really integral part of the look that i want for my car.
Thanks guys.
Louie
ohh well it is something that i will have to consider.
it will be a really integral part of the look that i want for my car.
Thanks guys.
Louie
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Enthusiast
Joined: Feb 2003
Posts: 614
Likes: 0
From: Michigan (Holland/Grand Rapids)
Originally Posted by half-n-half
but those say thet are acrylic mirror...what is that?
Cheap clear acrylic plastic with a mirrored coating on the back. Stick with the Stainless Steel as the mirrored plastic is tacking looking.
I bought the "mirrored" ones from Spinner Designs and already had 2 of them fall off, and yes, I do know how to prep surfaces for decals, emblems etc. I'm going to be replacing mine with SS Inserts. I used their stuff on Fuel Rail Covers before and it's top quality. Expensive is in the eyes of the beholder.
Bryan
parbreak
Bryan
parbreak