vette fuel rail covers on a GTO.. DONE!
#1
On The Tree
Thread Starter
Join Date: Mar 2004
Location: gtO-Town
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
vette fuel rail covers on a GTO.. DONE!
i believe i'm the first to do so. i did these a couple weeks ago... just been super lazy and haven't posted them here.
thanks to stoleit for planting the idea to do this...
i got the FRCs free from some vette shop in sanford.
paint, primer, and body filler was free.
the decals were free as well.
i sprayed 2 coats primer, 2 coats BMW imola red paint, applied the decals, and 2 coats clear.
thanks to stoleit for planting the idea to do this...
i got the FRCs free from some vette shop in sanford.
paint, primer, and body filler was free.
the decals were free as well.
i sprayed 2 coats primer, 2 coats BMW imola red paint, applied the decals, and 2 coats clear.
#6
TECH Enthusiast
iTrader: (2)
Join Date: Jan 2005
Location: Drexel Hill, Pa
Posts: 630
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JackZ28
Those look fabulous! I wish the fbody's engine was that exposed. Nice job!
Trending Topics
#10
On The Tree
Thread Starter
Join Date: Mar 2004
Location: gtO-Town
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by stoleit
they looks good! nice job, so how much total did you spend? wasnt it like 4 bucks or something?
#12
TECH Addict
iTrader: (17)
Join Date: Dec 2002
Location: Hanover, MD
Posts: 2,190
Likes: 0
Received 0 Likes
on
0 Posts
Looks real nice. Yeah, the stock GTO covers are way to bulky and square.
Did you have to make any cuts or move anything around to make them fit or were they are direct "snap on". Could we get a pic of the driver's side too?
Bryan
parbreak
Did you have to make any cuts or move anything around to make them fit or were they are direct "snap on". Could we get a pic of the driver's side too?
Bryan
parbreak
#14
On The Tree
Thread Starter
Join Date: Mar 2004
Location: gtO-Town
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
i had to make a notch in the left one to clear the throttle body bracket. i also didn't like how the right one was rubbing against that hose (near the intake manifold) so i ground that a little to clear it better. for the most part, it was a direct snap on. the fuel line doesn't line up to the holes in the right one like in the vette... it comes directly out the back so it's causing the back portion of the right side one to not click down on the coil pack screw.
i still have the stock FRCs but i'm painting those too, just to have a spare set in case the nice vette ones get ruined somehow. they're in the process of being sanded... i really haven't had time to get going on these.
i still have the stock FRCs but i'm painting those too, just to have a spare set in case the nice vette ones get ruined somehow. they're in the process of being sanded... i really haven't had time to get going on these.