Camaro HID Projector Headlights
#43
Launching!
Join Date: Mar 2004
Location: Northern NJ
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
oh, not yet. I'm hoping soon. However since my car is in storage for a little bit more, i can't do final test fitting even after i finish putting them together. I'm trying a few diffrent approaches to see what's the most functional as well as not hidiously ugly. I'm currently going with a custom mold and casting a piece. But it takes time, which i have to find around work and other things.
I could have a part put together fast, however since appearence is important (since we don't drive hondas) i need to come up with a solution that will work with that as well.
I could have a part put together fast, however since appearence is important (since we don't drive hondas) i need to come up with a solution that will work with that as well.
#46
Launching!
Join Date: Mar 2004
Location: Northern NJ
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
BMW style light?? The projectors i am currently using are an e46 style HID projector out of a 2003 BMW 3/5 series. 5-600 would not be practical for dual HID projectors. The sets of HID projectors, bulbs and ballasts go for 200-300 per pair.
What mine are is a projector mounted behind the halo. The halo ring will surround the front of the projector. I am also creating a simple reflector for the old "low beam" section. I am going to use it for my strobe tube for my lights, but it could be used with any type of bulb.
A dual projector starts to get tough, there isn't much room behind the headlight toward the edges.
What mine are is a projector mounted behind the halo. The halo ring will surround the front of the projector. I am also creating a simple reflector for the old "low beam" section. I am going to use it for my strobe tube for my lights, but it could be used with any type of bulb.
A dual projector starts to get tough, there isn't much room behind the headlight toward the edges.
#47
TECH Senior Member
iTrader: (2)
You wouldn't want a seperate HID high beam. Because they take a few seconds to turn on and a minute or two to fully warm up, you wouldn't be able to flash the highs. The best way to have an HID high beam is to use a movable shield in a single housing. To activate high beams, the cutoff shield simply moves out of the way and the beam cutoff moves higher. That's the best way to do it.
#48
Sweet Cheeks
iTrader: (7)
Join Date: Aug 2002
Location: Chicago
Posts: 2,277
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JasonWW
You wouldn't want a seperate HID high beam. Because they take a few seconds to turn on and a minute or two to fully warm up, you wouldn't be able to flash the highs. The best way to have an HID high beam is to use a movable shield in a single housing. To activate high beams, the cutoff shield simply moves out of the way and the beam cutoff moves higher. That's the best way to do it.
#50
Registered User
Thread Starter
iTrader: (127)
Join Date: Apr 2004
Location: Tallahassee
Posts: 1,985
Likes: 0
Received 0 Likes
on
0 Posts
Ok Im finally getting my project headlights in in monday. I oredered them from some company "procarparts" and they wont answer my emails or ****. theyre on ebay so watch out for them.
I ordered a different set from new era perf on ebay, theyll be here monday.. Ill have some updates next week.
Guy - any progress??
I ordered a different set from new era perf on ebay, theyll be here monday.. Ill have some updates next week.
Guy - any progress??
#51
Sweet Cheeks
iTrader: (7)
Join Date: Aug 2002
Location: Chicago
Posts: 2,277
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LS1_SS
Ok Im finally getting my project headlights in in monday. I oredered them from some company "procarparts" and they wont answer my emails or ****. theyre on ebay so watch out for them.
I ordered a different set from new era perf on ebay, theyll be here monday.. Ill have some updates next week.
Guy - any progress??
I ordered a different set from new era perf on ebay, theyll be here monday.. Ill have some updates next week.
Guy - any progress??
#52
Registered User
Thread Starter
iTrader: (127)
Join Date: Apr 2004
Location: Tallahassee
Posts: 1,985
Likes: 0
Received 0 Likes
on
0 Posts
Projectors are finished, I don't hae my camera dock with me but Ill see if I can borrow one from a friend and post some pics up tonight. They will also be for sale shortly, just need to make some minor adjustments to them.
-Nathan
-Nathan
#56
TECH Resident
iTrader: (8)
Join Date: Apr 2003
Location: Tallahassee, Florida
Posts: 853
Likes: 0
Received 0 Likes
on
0 Posts
Nathan...i've been thinking about getting rid of these Halo's for some HID's, but i dont have tons of money.
you sell the TL? i was up at the shop when that kid was asking about it...
you sell the TL? i was up at the shop when that kid was asking about it...
#58
Registered User
Thread Starter
iTrader: (127)
Join Date: Apr 2004
Location: Tallahassee
Posts: 1,985
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slmdLS1
Nathan...i've been thinking about getting rid of these Halo's for some HID's, but i dont have tons of money.
you sell the TL? i was up at the shop when that kid was asking about it...
you sell the TL? i was up at the shop when that kid was asking about it...
I may be able to do a partial trade with you Ill be back in town next week and Ill take a look at them. How long have they been on there?