:
Console cubby hole block off plate...(help)
Console cubby hole block off plate...(help) i looked around, but coudn't find anything....
...i'm looking for whoever was making those "plates" that went in place of the "cubby hole" on the LS1 style consoles. They were blank plates that went in place of that cubby hole and people were putting switches and **** in there. I'm looking for one of the blank ones in ebony...anyone help me out?
T.
...i'm looking for whoever was making those "plates" that went in place of the "cubby hole" on the LS1 style consoles. They were blank plates that went in place of that cubby hole and people were putting switches and **** in there. I'm looking for one of the blank ones in ebony...anyone help me out?
T.
Trending Topics
oooh...that's nice. I would love something like that, and the cup holder and ash tray filled in and all, the only problem is the color matching and the fact that you would no longer have the texture of the plastic anymore....
...any more pics of that?
...any more pics of that?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo If you are going to put switches in anyways, just get a vert plate and hack it up. That'll end up looking more stock then anything. The switches are also pretty similar so you could use a fog light, asr, window, lock, or top switch if one of those happens to match what you want.
Another option you may have not considered is that there are four switch openings in the radio bezel. Two of which are occupied by the Camaro emblem. Again you can just drop in additional fog light or asr switches and wire them up for a very good stock appearance.
Another option you may have not considered is that there are four switch openings in the radio bezel. Two of which are occupied by the Camaro emblem. Again you can just drop in additional fog light or asr switches and wire them up for a very good stock appearance.
Originally Posted by todddchi
If you are going to put switches in anyways, just get a vert plate and hack it up. That'll end up looking more stock then anything. The switches are also pretty similar so you could use a fog light, asr, window, lock, or top switch if one of those happens to match what you want.
Another option you may have not considered is that there are four switch openings in the radio bezel. Two of which are occupied by the Camaro emblem. Again you can just drop in additional fog light or asr switches and wire them up for a very good stock appearance.
Another option you may have not considered is that there are four switch openings in the radio bezel. Two of which are occupied by the Camaro emblem. Again you can just drop in additional fog light or asr switches and wire them up for a very good stock appearance.
No, it's not for switches or anything like that. I want to put my Firehawk plaque there instead of on the ash tray...so i need a nice clean piece...kind of like the picture that was posted a few above...
Originally Posted by SLPHawk300
oooh...that's nice. I would love something like that, and the cup holder and ash tray filled in and all, the only problem is the color matching and the fact that you would no longer have the texture of the plastic anymore....
...any more pics of that?
...any more pics of that?
Here you go:
Bryan
parbreak
Originally Posted by bdr_ws6
I like how you put the SS on it...I really like that.
Isn't that where the traction control on/off switch goes on cars equiped with it? I just use my hole there to hold my wallet haha.
Isn't that where the traction control on/off switch goes on cars equiped with it? I just use my hole there to hold my wallet haha.
Thanks, my car didn't have TCS, it just had the little cubby hole there.
Originally Posted by bdr_ws6
I like how you put the SS on it...I really like that.
Isn't that where the traction control on/off switch goes on cars equiped with it? I just use my hole there to hold my wallet haha.
Isn't that where the traction control on/off switch goes on cars equiped with it? I just use my hole there to hold my wallet haha.
You might want to get the panel that had the vert switch in it and just cover over that hole. Much smaller hole to fill.
Teching In
Joined: Jan 2006
Posts: 20
Likes: 0
Originally Posted by Mike02Z
I thought that was where the convertible top switch was? Did TA's put the TCS there as well?
You might want to get the panel that had the vert switch in it and just cover over that hole. Much smaller hole to fill.
You might want to get the panel that had the vert switch in it and just cover over that hole. Much smaller hole to fill.
Originally Posted by parbreak
Here you go:
Bryan
parbreak
Bryan
parbreak
I'd love to do something like that but smooth out the ash tray area...making it uniform. No way of keeping it textured lke the oem plastic hu?