*PICS* LT1 engine bay pics.
*PICS* LT1 engine bay pics. Decided to add some bling to the engine bay while in the midst of installing the LE2 setup...
Things are either polished or powdercoated. The ac condensor and brake lines have not yet been polished. Anything that is red will be either chromed or polished.
Things are either polished or powdercoated. The ac condensor and brake lines have not yet been polished. Anything that is red will be either chromed or polished.
x3 on the valve covers. Looking very nice. I notice you still have the factory airbox. I kept mine as well but purchased another cover so I could cut it out to expose the entire filter. Who knows if its worth it considering where the air comes in through the hood being somewhat small.
Valve covers are from ebay.
These are with a 'chevy' symbol and lettering, but I dont know whether they have the alternator notch in em...
http://cgi.ebay.com/ebaymotors/SBC-C...QQcmdZViewItem
...but these that I found I paid $85.00 on ebay. I cannot find them as of right now. Just keep an eye out for them.
These are with a 'chevy' symbol and lettering, but I dont know whether they have the alternator notch in em...
http://cgi.ebay.com/ebaymotors/SBC-C...QQcmdZViewItem
...but these that I found I paid $85.00 on ebay. I cannot find them as of right now. Just keep an eye out for them.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo how did you go about polishing the fuel rails, and how did you make those valve covers fit when in the auction they say they will not fit cars with the notch in the passenger side cover?
The link that I posted probably will not fit an lt1 due to the alternator location. I cannot find any listed on ebay to the guy that I bought them from either, but Ill contact him and see if he has any more available.
The fuel rails polish up very easily. Just grab a towel and some polishing compund and you're set. I did mine with them off of the intake, so it may have been a little easier that way.
The fuel rails polish up very easily. Just grab a towel and some polishing compund and you're set. I did mine with them off of the intake, so it may have been a little easier that way.
You can use a drill and them 'fluffy' white wheels and some polish on them. I did NOT sand the fuel rails at all. I dont see a need for it really, unless you have scratches in yours that you would like to get rid of, etc.
looks awesome but im more interested in that spark plug/coil setup you have can you PM me with some details! I really would like a setup where I could drive in the rain and not worry about the opti going haywire since it rains almost every other day here in florida haha 
Very nice work my friend. 
~Joshua 
