*both custom seats are in!*
#1
Restricted User - Non Spon Soliciting
Thread Starter
Join Date: Aug 2005
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
*both custom seats are in!*
I still need to do some adjusting. The drivers seat is sitting up higher than stock. Personally, I like a lower feel, so I will take out one spacer that I used (if I can). As I said in my other thread, these are taller than the stock seats...when you lean them forward to let someone sit in the back, they hit the roof. That is not a big deal for me b/c no one really sits back there. As for the seatbelt issue, I will be using our stock holders (I'll spray them black) and I'll mount them so the seatbelt is nicely in place and across the shoulder properly. They are pretty comfortable and have a nice custom look to them. For $300 shipped, I can't complain. Feel free to ask me any ?'s...also, I need to clean the fiberglass with some polish so they may seem a little dirty. Sorry about some of the pics not coming out so nice, I wanted to get these up for everyone quickly.
thanks for looking...
here is when I only had 1 in...
thanks for looking...
here is when I only had 1 in...
#2
Copy & Paste Moderator
Looks great.
Can you post a pic of them leaned forward for rear access (like the last pic but leaned forward). You mentioned in another thread that they hit the roof.
Can you post a pic of them leaned forward for rear access (like the last pic but leaned forward). You mentioned in another thread that they hit the roof.
#4
Restricted User - Non Spon Soliciting
Thread Starter
Join Date: Aug 2005
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bayer-z28
Weight differance? Yeah?
They look like they were out of a Poarche. Nice mod! I need some seats...
They look like they were out of a Poarche. Nice mod! I need some seats...
#5
Copy & Paste Moderator
Originally Posted by *KANDY SS*
if you look up at the pic with the one leaning forward...that is when they are tilted forward.
#6
Restricted User - Non Spon Soliciting
Thread Starter
Join Date: Aug 2005
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by VIP1
I saw that pic, but I cant tell from that pic. Its too close, the top part of the seat and the area with which it interferes is cut off.
#7
Restricted User - Non Spon Soliciting
Thread Starter
Join Date: Aug 2005
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#11
Restricted User - Non Spon Soliciting
Thread Starter
Join Date: Aug 2005
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
they will be similar to how the stock seatbelts are right now. I am going to mount our stock ones just enough so the belt feels like the stock seats. They should sit nice.
#13
Restricted User - Non Spon Soliciting
Thread Starter
Join Date: Aug 2005
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BitViper
About time...hey they look really good...
Mine are still at the shop..the guy whos going to do some letttering on teh seat has goe awol...a two day job has turned into 8....and counting..
Bet thoes feel really good in the corners...
Mine are still at the shop..the guy whos going to do some letttering on teh seat has goe awol...a two day job has turned into 8....and counting..
Bet thoes feel really good in the corners...
bitviper: it sucks that it has turned out to be an 8 day job, but I'm sure your seats are gonna look nice as hell when they are done!
#19
TECH Fanatic
iTrader: (12)
Join Date: Jan 2006
Location: sw fl.
Posts: 1,899
Likes: 0
Received 0 Likes
on
0 Posts
looks great... and an awesome price (i may do these instead of buying custom seat covers)
what did u do for the brackets
in my old camaro i cut off the old brackets and welded a piece of 1/4 steel to the stock brackets.. then drilled holes in the steel to bolt the seat to it.....the passengers side sat higher but the drivers side was lower (because it was in a 95 camaro with the manual "rocker" seat and i didnt convert that over i lossed about 2 inches)
how is the clearence from side to side do they hit the door panels cant really tell from the pics
what did u do for the brackets
in my old camaro i cut off the old brackets and welded a piece of 1/4 steel to the stock brackets.. then drilled holes in the steel to bolt the seat to it.....the passengers side sat higher but the drivers side was lower (because it was in a 95 camaro with the manual "rocker" seat and i didnt convert that over i lossed about 2 inches)
how is the clearence from side to side do they hit the door panels cant really tell from the pics