6LITEREATER

iTrader: (56)

I agree with you 100%

Brian2006

iTrader: (42)

BWAHAHAHA

Reject

iTrader: (24)

hotsauce886

what else do you need with the niteshade spray?

chae

iTrader: (8)

Do those light up at all when someone is behind you. I'd be worried constantly about being rearended with those on my car.

allbaugh_04

iTrader: (6)

Can someone tell me about this "nightshade". I'm sure the clear coat idea would be great, but probably non reversible, and I've heard of people getting their covers jacked..

Reject

iTrader: (24)

search for it on here, there was a guy that did a write up for it. basically you can call it a premixed clear and black mix in a can

Reject

iTrader: (24)

https://ls1tech.com/forums/paint-body-work/447719-vht-nite-shades-write-up-installation-preparation.html theres the link if you cant find it

Camaro01SS4life

iTrader: (4)

This stuff is badass...You can find it at most hobby stores...
??
http://www.hobbylinc.com/htm/tes/tes2949.htm
I have put it on a couple of tail lights...Then a clear on top...

Kev

killerbeez

iTrader: (9)

I got that tint 3m stuff, works good but when I get my windshield retinted im gonna have my guy mess with them and get the heat gun to the corners cause up close its not perfect, but i know he can get em all the way, I'd recommend them

djsanchez2

iTrader: (14)

TTT.... I did this today and was having issues with the way the vinyl looked over the cast letters on the lenses. I think im gonna buy a used set to play with.

run em down

iTrader: (1)

those ebay tint films are ok no matter the distance, but when i wanted to get her on the upper range of the speedometer that tint film crap just blew off haha. i used vht, messed up the clear the first time and had to wetsand, what a joy.

djsanchez2

iTrader: (14)

That is what i used, is the Ebay crap. It sucked to get right. I think im gonna use the heat to fit stuff that comes uncut next time. I've already found a new set of tails for cheap. So we'll see how it goes.

Plus i have the added bonus of ditching the current heat warped tails i have.

TooFastT/A

Ditch the Film, use Niteshades and be done with it!! It is not that hard to do and the odds of messing up is like 1 in a 2000!

There are plenty of people whom went the Niteshades route, and looks perfect....Hell, I did it the first time and got it perfect with no prior painting experience, with the exception of painting model cars!!

Just my .08 (due to current inflation) though!!

Reject

iTrader: (24)

damn i forgot i made this thread! i got one lt1 light but need oooone more so i can start tinting

djsanchez2

iTrader: (14)

EVERY SINGLE nightshaded car i see looks like ***!!! It is always foggy, dull, chipped, too dark, or a blotchy spotted mess.

Therefore i have chosen to go another route.

bricez28

i did it on my headlights, and fogs. looked like **** failed miserably.

TooFastT/A

Well, everyone who has seen my tails and other lenses says it turned out great and inspired other people to do theirs! There is another guy on here that has a NBM T/A that everyone praises on his Niteshaded work! So, maybe your just seeing the end results of the people whom have had problems or ones that did turn out like ***!

Heres mine:

TooFastT/A

I'm sorry, doing it to your headlights and fogs was your First Mistake!! IMO, that is one of the most Retarded things to do to ones car, your headlights and fogs make it to where you can see in the night, but some people I guess think that hey, my lights are too bright, so I am going to tint them so they look cool, but when I drive my car at night....I guess I dont have to see where I am going!

Not to mention the fact the Heat from the 55 watt lamps in your heads and fogs might have warped them some.....don't know, never and will never try that!!