Post ur CAMARO interor mods here
#64
TECH Regular
iTrader: (12)
ill have to find some pictures on my home copmuter, but my two favorite interior mods are my pushstart button located in the cig lighter spot, and i installed a trans am gauge bezel over my camaro gauges. I hated the plane looking camaro gauge, the trans am bezel makes it look very cool.
#68
TECH Veteran
iTrader: (7)
Join Date: Jun 2006
Location: Bay Area California
Posts: 4,409
Likes: 0
Received 0 Likes
on
0 Posts
Pics were taken fast and are kinda crappy, but you get the idea
-Rubber grommet added to the little trip reset hole:
-I don't smoke, so I got an identical 12 volt cover as the lower one and replaced the cig lighter:
-Auto shift boot from redlinegoods:
I also changed all interior instrument lighting to red Leds, pics on my fquick page
-Rubber grommet added to the little trip reset hole:
-I don't smoke, so I got an identical 12 volt cover as the lower one and replaced the cig lighter:
-Auto shift boot from redlinegoods:
I also changed all interior instrument lighting to red Leds, pics on my fquick page
Last edited by Ls1CamaroGuy87; 08-19-2010 at 03:03 AM.
#75
TECH Fanatic
You both might be interested in tracking down one of these discontinued carbon fiber Grant steering wheel restyling rings.
https://sites.google.com/site/brange...tsteeringwheel
Here's just a pic, but it's too big to use the img tag.
http://i103.photobucket.com/albums/m...maroCarbon.jpg
#77
12 Second Club
iTrader: (7)
Join Date: Oct 2005
Location: Englewood, CO
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
Good luck with finding it man. its pretty rare from what i can tell. my guy got it from some warehouse here in denver that has old textiles supposedly. i think my fabric is actually many years old. its gonna look **** when youre done though. i get lots of compliments.
#80
TECH Fanatic
iTrader: (3)
I'll bite just a little and show 1 part of my interior . Modernizing the center console . The console in the pics are design mock ups made with paper , thin card stock and masking tape for design purposes . The real deal with be plastic welded ABS . The last pic is a crude photoshop I did of what the finished console will look like . The big round button is gonna be one of the newer style GM oem buttons , modded to work on a simple on/off switch for a line lock . The 2 switches on the side of it are seat heater switches . Lots of work ahead , lol .