Mark IXZD 150

iTrader: (1)

Wow. Those are some of the nicest aftermarket seats I've seen! Love 'em.

I wonder if I could put them in my '06 Impala SS. The factory seats have absolutely no lateral support. Do the mounting plates (if available for my car) attach to the factory sliders so I can keep the power seat capabilities?

arizen

The first company I could think of that may have mounting brackets would be Wedge Engineering. You'd have to call because their application list isn't always current. It is usually difficult to adapt power tracks and most who have tried have found the seat sits too high if possible.

Nine Ball

iTrader: (38)

98-99 Camaro/Firebird had dark gray interior, called "dark pewter". The 00-02 cars were black, called "ebony". Even the plastic doorpanels, dash, carpet, etc... are different between those.

They also offered tan interior for all the years, that remained the same.

arizen

Here are 2 pictures of a set of our seats installed in a Camaro.

JR HAWK 9

iTrader: (3)

^^^^ WOW, does that look good!!

arizen

Thank You! Kinda proud of them myself.

arizen

This customer had the harness slot removed from the headrest but you can keep the harness slot if you'd like as well.

Bill Bowling

iTrader: (6)

So these seats will not work with power seats? Is that right?

Bill

arizen

O/E Camaro tracks are not flat. They have an upward bow in the middle. Trying to mount our seats on the original tracks takes some fabrication and usually causes the seats to sit too high for most people.

SS125

iTrader: (1)

I've haven't seen these on your web site in ebony. Can you email the pn for these and the price but price them with the harness slots in the headrest.

arizen

We have not listed them yet because some people have asked for perforated inserts like the o/e interior. We have sent a hide out to be perforated and will be making a set once it returns. We can then determine a final price for those who prefer this option as well. We are expecting the price to be around $1200 per set including the factory seat belt guides. Shipping and mounting brackets would be additional.

We have an idea that can reduce the cost about $100. The seats below were made like o/e leather seats. They have leather on the "A" and "B" areas and matching vinyl on the "C" area and back of seat. We can make the seat with perforated leather for the "A" area and use the matching vinyl on the remainder of the seat. The vinyl is durable and takes less maintenance and many people couldn't tell the difference. We would give people the option either way.

arizen

We just made a set in Ebony leather with perforated leather inserts. This adds $50 per seat.

SS125

iTrader: (1)

Can these be bought now?

arizen

Yes, but they are made to order in about 3 weeks. The Ebony leather seats start at $1060 a set with our deeper back bolsters (all the ebony leather seats shown had our deeper back bolster option). Options like perforated leather inserts, seat belt guides, etc. are additional. Mounting brackets are additional as well.

ReFtheMC

iTrader: (6)

Damm i wish i wish i wish!

EdwardL

Are you able to put in different harness slots in the seats like the ones on the Corbeau Forza seat?

arizen

No, we cannot. The molded foam already has the cutout for the plastic piece we use.

f50nut

The stock Camaro seats are the things I hate the most about these cars. They're useless when it comes to holding you in place. These seats look great! Maybe one of these days

FASTERthanYOU

iTrader: (1)

These seats are sweet, but i'm a big guy. (6'3 230 pounds) and i'm concerned if they will be comfortable for me.

ls1mongrel

iTrader: (32)

I got those seats in my T/A.

Ill post some pics tonight.