new bling at MBA
Thread Starter
Teching In
Joined: Jan 2002
Posts: 30
Likes: 0
From: Wallyworld, CT
Re: new bling at MBA
ohhh.. tensioner pulley... yummmmm 
<font color="blue"> idano? <!--color--></font>
TECH Apprentice
Joined: Jan 2002
Posts: 332
Likes: 0
From: Louisville, KY
Re: new bling at MBA What is needed for the LS1 is "chrome" pieces. I have all your polished caps, but the difference in the look of polished and triple-plated chrome is night and day.
I like the pieces though.
I like the pieces though.
Trending Topics
Re: new bling at MBA Actually, I think some affordable smooth billet valvecovers without the coil pack mounts would rock. Make them tall enough to clear the aftermarket rocker arms. Our engines are ugly because of our coil packs. Maybe an MBA coil pack relocation kit with the valvecovers?
I would also like a polished aluminum or stainless round T56 6-speed shifter **** with the 6-speed pattern engraved in it, that pattern being red or black painted. To match my Camaro and look old school
Tony
I would also like a polished aluminum or stainless round T56 6-speed shifter **** with the 6-speed pattern engraved in it, that pattern being red or black painted. To match my Camaro and look old school
Tony
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Re: new bling at MBA
ohhh.. tensioner pulley... yummmmm
<font color="blue"> idano? <!--color--></font>
-- but honestly the lower pullies can be dressed up just by chroming the washers. I do think there would be a market for billet pullies all around as many of these engines are finding their way into older cars where you CAN see the lowers.The tensioner pulley is the best one to do, Maybe a matching PS pulley (like the Turn one unit).. would be nice if you could find a way to dress up the "taco bell" pulley on the H20 pump
So when will this tensioner pulley be out? Need a west coast beta test car???
TECH Enthusiast
Joined: Dec 2001
Posts: 601
Likes: 0
From: Texas
Re: new bling at MBA I second the relocation kit and valvecovers.
Actually, I think some affordable smooth billet valvecovers without the coil pack mounts would rock. Make them tall enough to clear the aftermarket rocker arms. Our engines are ugly because of our coil packs. Maybe an MBA coil pack relocation kit with the valvecovers?
Tony
Tony
Thread Starter
Teching In
Joined: Jan 2002
Posts: 30
Likes: 0
From: Wallyworld, CT
Re: new bling at MBA
I second the affordable smooth billet covers!
Hmmm, we made a few sets of LT4 replica vlave covers (but 3/16" taller) some years back. Let's see, each side was a 40 pound bar of aluminum and after 8 solid hours of CNC time we had exact replica's, including the internal ribs and such.
I don't know if anyone has experience in manufacturing, but that all added up to something we felt was NOT marketable as the cost would be NUTS. But myself and my Sales Mgr have some very nice valve covers on our LT1's
Wasn't there a car dealer in Jersey offering some last year?
The place that was doing electric water pumps for a while?
Nineball..... satin anodized shifter **** with 6 speed patern is a custom request that has been done a bunch, just not stocked. All you would need is a lacquere stick in the color of your choice.
Re: new bling at MBA
I second the affordable smooth billet covers!
That is a HUGE tooling and materials cost for billet one piece valve covers.. add in a profit and you will be lucky to sell 10 sets.. maybe a few more to the transplant guys
Hey, you should buy my SS and design lotsa cool stuff for the fbodies.. it can be your LS1 show car
It already has most of your products
Re: new bling at MBA I think the tensioner pulley, water pump, and PS would all be good pulleys to do. The water pump isn't too noticeable straight on but step to the right and it's very easy to see.
Re: new bling at MBA
I think the tensioner pulley, water pump, and PS would all be good pulleys to do. The water pump isn't too noticeable straight on but step to the right and it's very easy to see.
Thats why I had to locate a brand new 98 water pump.. so I could remove the pulley to chrome it