Post your camaro with CME exhaust
#382
TECH Resident
iTrader: (23)
Join Date: Oct 2008
Location: Rhode Island
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
i need to remount my valence. does anyone know where i can get the pins to mount the ends?
where are you guys putting your strips of double sided 3m tape?
i jacked mine up a while ago and i plan on fixing it soon
btw, CME makes the car
where are you guys putting your strips of double sided 3m tape?
i jacked mine up a while ago and i plan on fixing it soon
btw, CME makes the car
#387
TECH Enthusiast
iTrader: (4)
Join Date: Mar 2009
Location: Louisville, KY
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
^^^^
Mainframe, if you don't mind what kind of fastener is holding it on right behind the rear tire. There is a predrilled hole in that area and I was wondering what type fastener SLP placed in there. Take a pic too, if you don't mind.
Mainframe, if you don't mind what kind of fastener is holding it on right behind the rear tire. There is a predrilled hole in that area and I was wondering what type fastener SLP placed in there. Take a pic too, if you don't mind.
#389
I have an original SLP valence however there is no additional provision for any plastic screws other than what already holds on the rear lower plastic part of the quarter panel. I have seen a 35th anniversary original SLP with an original CME and it looks like either the dealer or the owner drilled a hole right behind the rear tire and used a plastic push in screw that GM uses. It held in the end of the valence however it did not look original.
#392
Cme ftw!
I will be updating my CME pics in a week or 2 she is almost done I'm going with the dynomax race bullet to take place of the borla cat back that is currently on my car
#393
#399
11 Second Club
iTrader: (2)
I actually like that shot of your Camaro quite a bit! Why dont you
care about the tips?
Thank you Check out this thread for info...
https://ls1tech.com/forums/appearanc...93-2002-a.html
care about the tips?
Thank you Check out this thread for info...
https://ls1tech.com/forums/appearanc...93-2002-a.html