Luna

iTrader: (6)

IMO ditch the FRCs. Theres an engine in there, don't you want to see it ?

TORCHD 02 TA

iTrader: (39)

i dunno LOL... come paint my coil pack then and the top of the valve cover.. i will pay you $$$$$

slammed1500

iTrader: (1)

that how i feel

01SOMSS!

iTrader: (12)

you can see my polished water pump andthe new slp maf form this view



I also painted alot of the lower brackets and the bumper suports

fast01z28

iTrader: (6)

the ones on the drivers side can be relocated without any modification. if you look down and to the inside, perpendicular to the radiator youll see another ground bolt directly bolted to the chassis. Both of those grounds reach without being lengthened. just unscrew it and add the two grounds to it.

I tried to get a picture but its near impossible because theres a wiring harness in the way.

TORCHD 02 TA

iTrader: (39)

looks good for rattle can and paint not exact. saw them in another thread.

How hard is it to get the coil packs off and what ever else to paint

thecobrahunter

iTrader: (1)

Here some pics of my car...

Marc3.4V6

iTrader: (1)

Don't know if it would looks better or worse, but you could try painting the brake fluid reservoir black.

TORCHD 02 TA

iTrader: (39)

hey 01SOMSS where did you get all the SS stuff for the fuse boxes, brake master cylinder and battery??? Was it from Specialized Stainless or what ever they are called?

Also did you polish your A/C canister and ABS box and lines with mothers alum. polish??

Let me know

Luna

iTrader: (6)

Thats what I did doesn't take that long at all.

pwterz28

iTrader: (10)

here is some pics on mine not to sure how to make the pics bigger like the rest of you all

TORCHD 02 TA

iTrader: (39)

well today i polished my AC canister and ABS box.. Came out good, but still needs more polishing..... I can not believe that they are chrome now

Still like i said needs more work.....

I think i am going to pull off the coil packs bracket thingy majigy and paint them too...

95Banshee

paint your air lid black but where the TA and bird are mask off the same shapes and when your done peal them off so the TA and bird are transparent. And anything that is mis colored like the oil dipstick and other things that stick out paint black. and MAF ends