Does anyone know how I can change the wiring on the foglights so they stay on all the time. When I hit my brights they turn off, and I want em on all the time. They make wiring kits for many vehicles but not for F-Body's that I could find. If anyone has any ideas please chime in.

 

in the appearance hall of fame in the sticky under lighting

 

https://ls1tech.com/forums/appearance-detailing/721694-write-up-hi-beams-fog-lights-same-time.html there it is

 

I used that write up on my car, actually not too hard to do. Just be sure you connect the new ground line to the proper wire!

 

I used that write up, and when I turn my brights on, the fogs stay on but my headlights turn off completely. This is on an LT1 TA. I just grounded the relay side of the wire to a ground on the core support, does it matter where the ground is?

 

Just curious if anybody confirmed this would work on a LT1 car. I followed the write up exactly, and my fogs stay on but my headlights go completely out when I hit the brights. I spliced the green wire back together, and it is still doing the same thing, my brights wont work at all!

 

on my 96, I cut and ground the green wire and the foglights stay on and so do the highs and lows...

 

Please tell me exactly how you did this!!!!!