WHERE'S THE BERGER MOD WRITE UP!! Seriously
#22
TECH Enthusiast
iTrader: (5)
Join Date: Jun 2007
Location: Flourtown, PA | Bethany, DE
Posts: 537
Likes: 0
Received 0 Likes
on
0 Posts
Yah it's the angle and lens. I shot the first one from about 300 feet away with my 70-300mm lens. I shot the second (closer shot) from about a foot away with my 18-70mm lens.
#23
Copy & Paste Moderator
I also took pics of mine, it's a less complete write-up but might be of interest nevertheless:
https://ls1tech.com/forums/showthrea...ght=how+berger
https://ls1tech.com/forums/showthrea...ght=how+berger
#25
TECH Enthusiast
iTrader: (5)
Join Date: Jun 2007
Location: Flourtown, PA | Bethany, DE
Posts: 537
Likes: 0
Received 0 Likes
on
0 Posts
Mine was a rattle can job. We purchased Krylon Fusion paint as that stuff chemically adheres to plastic. We did 3 or 4 coats and it's been almost a year. It's holding up great, no flaking at all *knock on wood*
#30
Staging Lane
iTrader: (5)
Join Date: Mar 2007
Location: Shelton, CT
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Hibachi ur lt1 looks great! im glad to see somebody else painted their spoiler black too! Mines painted gloss black. Everybodys head does a double take when the walk past it because its so subtle on a NBM car. Ill post pics tomoro of my berger and spoiler.
#31
TECH Fanatic
iTrader: (2)
Join Date: Sep 2007
Location: Cairo, GA
Posts: 1,235
Likes: 0
Received 0 Likes
on
0 Posts
looks good OP. i'm going to do mine as soon as my stainless camaro lettering comes in. i think i'm going to get an old school SS badge or an old school "chevrolet camaro" badge. does anybody wetsand before painting? and with that primer you dong have to sand at all?
#33
TECH Veteran
Thread Starter
iTrader: (4)
Join Date: Aug 2006
Location: San Marcos/Plano, Texas
Posts: 4,821
Likes: 0
Received 0 Likes
on
0 Posts
yea im spray painting my stainless steel CAMARO inserts black chrome just need to find the time. I wet sanded with 400 grit but youre supposed to do 600 and i didnt use a primer cause spray paint has an adhesive in it that sticks. So there is no need to prime
#34
TECH Fanatic
iTrader: (2)
Join Date: Sep 2007
Location: Cairo, GA
Posts: 1,235
Likes: 0
Received 0 Likes
on
0 Posts
ok, i got some 400 and 1000 grit wet sanding paper but all the black krylon fusion paint i could find was gloss and i'm looking for semi-gloss. i'll try lowes tomorrow. and black chrome inserts should look real good.