Side Exhaust.
#22
TECH Fanatic
iTrader: (6)
Join Date: Jun 2003
Location: DFW
Posts: 1,203
Likes: 0
Received 0 Likes
on
0 Posts
Re: Side Exhaust.
Damn, I wish I would have known, I just threw away the original bumper off my formula... let me make a call and see if my buddy still has it laying around the shop.
On the exhaust thing I can only find on pic of Onyx's car and it's from the rear so it doens't show the side pipes... Sorry guys, I deleted about 2 or 3 hundred F-body pics not to long ago.
On the exhaust thing I can only find on pic of Onyx's car and it's from the rear so it doens't show the side pipes... Sorry guys, I deleted about 2 or 3 hundred F-body pics not to long ago.
#23
The rear bumper on formulas don't have the cutouts for tips like TA s but I am using a true dual setup and putting my exhaust out the side through a pair of
MBRP T5119 tips. My car dosn't have skirts should i still worry about heat from the tail pipes? But if all goes well mine should be done by august and will have plenty of picts to share.
MBRP T5119 tips. My car dosn't have skirts should i still worry about heat from the tail pipes? But if all goes well mine should be done by august and will have plenty of picts to share.
#29
#37
Actually this is one of my upcoming projects. I'm going to use stock side skirts from a Camaro with a sport appearance package. I'm not sure on what I'm going to do as far as a heat protectant, but I do know it is a factor. All of this will be done in the spring, so I've got some time to think it over.
Sounds like a project for 6LE if there is enough interest that others have... or not. Who knows!
#38
TECH Resident
Join Date: Jun 2008
Location: Gainesville, FL
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
most of us can't afford 6le products.
best bet is just run a pipe to the side with no side skirt. or cut out a hole in RS/WingsWest/TA skirts. round shaped or rectangle shaped. pretty easy. use a cut-off wheel probably? any better way to cut a hole in urethane? i plan on doing it on my 93 z28. just not sure what tips i'm gonna use yet. could use the stock z28 rectangle tips.
i like the newer cervini side exhaust tips also.
best bet is just run a pipe to the side with no side skirt. or cut out a hole in RS/WingsWest/TA skirts. round shaped or rectangle shaped. pretty easy. use a cut-off wheel probably? any better way to cut a hole in urethane? i plan on doing it on my 93 z28. just not sure what tips i'm gonna use yet. could use the stock z28 rectangle tips.
i like the newer cervini side exhaust tips also.
Last edited by FastRidesOnly; 07-11-2012 at 09:58 AM.