Neon Ram Air Scoops
Neon Ram Air Scoops I bought 2 12" cathodes to put in there, but there not as red as I wanted them to be.
So, I wanna see if anyone else has pics of this, and where they got there lights from!
So, I wanna see if anyone else has pics of this, and where they got there lights from!
cold cathodes tend to not be very red but more pinkish. What some people have done is taken red saran wrap and wrapped it around the bulb to make it redder.
I'd try LEDs, those would be really red.
I'd try LEDs, those would be really red.
Alright well i'm getting the ones off of newegg. (computer parts store).
http://www.newegg.com/Product/Produc...82E16811994003
If anyone is ever going to do something similar, or needs cathodes, i reccomend going here. All you need to do is put all the comp. junk aside and use the power/ground wires.
http://www.newegg.com/Product/Produc...82E16811994003
If anyone is ever going to do something similar, or needs cathodes, i reccomend going here. All you need to do is put all the comp. junk aside and use the power/ground wires.
Trending Topics
I'll definitely take pics. I have pics of the one thats in now, I actually ripped the one out of my computer to see if it would work, LOL. It did but it's not bright enough..
Ordered 2 12"s :]
Ordered 2 12"s :]
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Hey Brian. If I did LED's wouldnt there still be wires..? And i'm gonna get a small wire-loom and run the wires through there, and attach it to the hood with wire clips, that way it looks somewhat factory. Right now the wires are pushed to the side of my engine bay until i got everything right. And I got pics of the guy you might be thinking of:
this is what I mean with the wire loom:
this is what I mean with the wire loom:
This is why i had to order new tubes.. This is what it looked like when i turned on the old RED ones. There were TWO 12" in there.
and here's the tube itself:
And they were supposed to be RED!
In person, when those were on, it'd look like I put a spot light in the nostrils lol.
I'll post pics when the new ones arrive
and here's the tube itself:
And they were supposed to be RED!
In person, when those were on, it'd look like I put a spot light in the nostrils lol.
I'll post pics when the new ones arrive
TECH Senior Member
iTrader: (42)
Joined: Dec 2004
Posts: 5,063
Likes: 0
From: Tomball/Nacogdoches TX
I was talking about hiding the cathode tubes... not the actual wires. That'd be no problem. If you go with the cathodes, just try and mount them as close to the hood as possible where you can't see the tubes from the outside.
