will you still sell just the side pieces for those of us that already have things from emblempros?

 

oh ok, makes perfect sense. i dont mind losin my factory seats. maybe u posted this already, so whats the price range we are lookin at? u can probably count me in for the right price.

 

Any chance these would fit an LT1 Camaro?

 

You can bolt them down.

 

Yup. I will sell just the side pieces, just the center piece and then the side piece and center piece as a set.

Actually, my center piece wouldn't interfere with emblem pros side center piece anyways...

 

Pricing is in first post...

 

Sounds good, looking forward to seeing the finished product!

 

Are we placing orders now and are you still doing free seat brackets for the first ten orders?

 

just an fyi when i made these for my car i did them out of steel, plexi, and lexan and lexan has been the best thus far. its resilent to denting god forbid u drop something on it like the thin gauge metal and its very pliable without cracking. also be careful of the areas behind the headlight on ss models in particular as they tend to rub. did emblempros ever make these? i know i had worked with him a bit to get them going but i havent been on here in months.

 

I was kind of hoping these would have been made of black ABS plastic for that OEM look, but I'm still curious of the final product.

 

Agreed.

Also, how much will these weigh?

 

I searched you and was reading up on yours last night... As I have said before , GORGEOUS engine bay! Lot of work and it shows

I chatted with my guy today. We talked about lexan, can't powder coat. We talked about aluminum, dents too easy like you said.

So we decided on a nice grade stainless steel. If it rubs people could easily add a soft piece of felt to the hood like they do for the air lid

 

Not too many people are willing to powder coat plastic (for those who DON'T want the OEM look) BUT stainless steel can easily be powder coated in a satin black wrinkle finish to give the OEM (exact look you want) look

 

thank you. what i finally ended up doing was grinding down a little on the bottom side of the hood and repainting it. i did my bay in gloss black so that worked for me i just sprayed those with the same paint. ill be curious to see how yours turn out. ive been thinking about new ways for the center section but so far i think the one i have is the best way to go without getting into fiberglass.

 

Very Nice man!

Keep us posted!

 

Well, I asked what you wanted me to do with the extra 1/4" ABS I had and a lot of people wanted plates to mount on their console for gauges, switches, etc...

So I made some



I offer three designs:

Blank...



2 Gauge Style...





and

1 Gauge Style...





which is symmetrical so it is reversible...





Like all the other plates out there, you simply epoxy these on and make sure there is no factory plastic in the way of whatever you are mounting (gauges, switches, etc...).

Unlike other previous ones made, these are 1/4" thick, similar to the factory plate (used for TCS buttons in Birds and Convertible Switches in both cars) I used to mount my nitrous gauge (soon to get replaced by a double gauge plate )...



Here they are next to a factory key fob for reference...



GAUGE HOLES ARE FOR 2 1/6" SiZE GAUGES

I think they turned out great and will look very good in any interior

Here's the breakdown.. ANY PLATE YOU WANT IS $30 SHIPPED.

I searched around and these are HALF THE PRICE of others that USED TO BE (not even around anymore) out there and TWICE THE QUALITY.

It is a limited quantity because we only have so much scrap material. The $30 covers the water jet fees, paypal fees, shipping and gives me literally a couple bucks profit.

No GP, no special deals (unless you want more than one plate, I'll give a $10 discount off each additional plate to be shipped to the same address) AND THERE IS A LIMITED QUANTITY OF MATERIAL.

So, if you want them order now... Just paypal $30 to madelisle@yahoo.com and put in the note the style you want. I pick up on Fridays and ship on Monday for these, just so you know...

QUALITY IS GUARANTEED!!! I will not ship you something misshapen, nicked, scratched, etc...

Just sitting here waiting for you to order



Official Sponsor Sales Thread here:

https://ls1tech.com/forums/showthrea...5#post10240505

 

Camaro

Door handle bezel (pair) $200
Switch panel (pair) $120
AC vents (pair) $130
Top console for a flat top deleting ashtray and cup holder $200
Top console stock $250

Gauge bezel (part on the outside of cluster, part of dash sort of) $200
Radio trim $150


Firebird

Door handle bezel (pair) $200
Switch panel $150
Top console for a flat top deleting ashtray and cup holder $200
Top console stock $250

Gauge bezel (part on the outside of cluster, part of dash sort of) $275
Radio trim $150


SHIPPING BACK TO YOU IS INCLUDED (you pay shipping to us).

From my guy...

"The firebird parts are pricier because they are just simply bigger and there are a lot more curves to deal with. I've presented an option for the upper console to have a flat top too for a good price break. It would be a great place to mount switches, and it also smooths out the interior a good bit... not to mention is massively less labor intensive."

Now, those are the prices if you just want to buy individually... Here's PACKAGE PRICING:

CAMARO $850 SHIPPED (either console style) +3% if you use paypal.

FIREBIRD $850 SHIPPED (either console style) +3% if you use paypal.

Cheaper price because carbon fiber costs less the more you order...

So, pay for what you want (via paypal to madelisle@yahoo.com or contact me via e-mail for other means), then you will be given instructions of where to ship your item(s).

From the day he gets them to the day he mails them out is a (proposed) one week turn around. So basically, two weeks from the day you mail it out you should have it back.

We were going to do cores and core charges but it just gets too messy and since removing none of these parts will cause you to not be able to drive you car we don't see the need...

Here's a few examples...









HE WILL DO CUSTOM REQUESTS... He just did these:







JUST E-MAIL ME IN CUSTOM INQUIRIES AT madelisle@yahoo.com and we'll take care of you

Is this expensive? Yes. Is it REAL Carbon Fiber that won't peel off like the sticker Carbon Fauxber other companies sell... HELL YES

Nice product for a nice price for those who want it

Here's the official sponsor sale thread:

https://ls1tech.com/forums/showthrea...7#post10240757

 

Any word on whether or not fiberglass will be an option for a price break?

 

No fiberglass. To be honest, what is the point in wrapping your interior parts in fiberglass??? You can just smooth, primer and paint the parts for the same effect

 

I just ordered one but forgot to note the style. Check your PM box!