Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

transmission mount question

Thread Tools
 
Search this Thread
 
Old Dec 7, 2008 | 03:17 PM
  #1  
jawsgt's Avatar
Thread Starter
Teching In
 
Joined: Apr 2005
Posts: 35
Likes: 0
Default transmission mount question

i have a 94 formula im going to be installing either a th350 or th400. is the mount the same and can i use the stock crossmember? i bought the car with no engine or trans and im installing a small block 350 out of an older vette. this car is goin to see the track alot so wut converter/gear combo is good? im pretty new to racing automatic cars every car i used to race has been a manual and when i picked this car up i wanted to mainly race it. It will have a cam/nitrous set up also
Reply
Old Dec 7, 2008 | 04:33 PM
  #2  
sz282's Avatar
Staging Lane
iTrader: (5)
 
Joined: Aug 2008
Posts: 93
Likes: 0
From: Cottonwood, AZ
Default

You'll need to get a conversion crossmember or modify the stock one bmr makes them as do others. If it's a mostly track car 3.73s or even 4.10s are good for an auto. Check out the FAQ in this section for a write up.
Reply




All times are GMT -5. The time now is 11:48 PM.