Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

TH400 driveline question

Thread Tools
 
Search this Thread
 
Old Jan 23, 2009 | 08:00 PM
  #1  
gsxr1k2's Avatar
Thread Starter
12 Second Club
iTrader: (6)
 
Joined: Jul 2007
Posts: 399
Likes: 0
From: A Mile High
Default TH400 driveline question

How much of the transmission side of the driveline has to be in the tranny. My driveline is only long enough to get a little under half of it in the tranny? It doesn't vibrate or leak and seems to drive fine but just wanted to be sure.
Reply
Old Jan 23, 2009 | 09:50 PM
  #2  
tptransmission's Avatar
Closed ex-Sponsor Account
 
Joined: Dec 2008
Posts: 434
Likes: 0
From: Az
Default

It all depends on the length of the yoke and also your rear suspension travel. In most cars such as yours, it should be fine if have a minumim appr. 2 inches of spline engagement into the transmission.
Reply
Old Jan 23, 2009 | 09:54 PM
  #3  
gsxr1k2's Avatar
Thread Starter
12 Second Club
iTrader: (6)
 
Joined: Jul 2007
Posts: 399
Likes: 0
From: A Mile High
Default

Ya I'd say theres at least two inches so cool, thanks!
Reply
Old Jan 23, 2009 | 09:58 PM
  #4  
tptransmission's Avatar
Closed ex-Sponsor Account
 
Joined: Dec 2008
Posts: 434
Likes: 0
From: Az
Default

You should be fine. A quick check is if you lift the car with axle full extended you don't want the yoke to come out to far.
Reply
Old Jan 24, 2009 | 11:05 AM
  #5  
gsxr1k2's Avatar
Thread Starter
12 Second Club
iTrader: (6)
 
Joined: Jul 2007
Posts: 399
Likes: 0
From: A Mile High
Default

K, will do
Reply




All times are GMT -5. The time now is 04:08 PM.