Originally Posted by 1FASTZ28

Well my car is supposed to be done on Monday, have to say I am very disappointed with the transmission shop that I took the car to. First off I talked to them about ordering a FLT or PerformaBuildt Transmission and they talked me into letting them rebuild it. I decided it couldn't be a bad option because I heard from my gf's dad that they do very good work and he has never heard anything bad about them. So I had it put on a flat bed and taken there since I was two hours from home. I got a phone call the next monday to tell me what they found, said my 3-4 clutched went out and they were going to do a rebuild and would need to install a new torque converter as well. He insisted I go with the stock stall again and I told him no I want a 3600 single disk stall. He told me that they ordered their converters directly from Precision Industries and he would call them to see what they recommended for a stock motor to keep in my powerband for street driving. About an hour later I got a phone call saying that he talked to them and they recommended a 2200 stall and no greater than that without a performance cam and a tune. So I settled with that. I then e-mailed Precission Industries who told me they have never heard of this shop, don't supply parts to them and never talked to this mechanic that I talked to. I am pissed, what is a person to do now? Any suggestions the car is supposed to be ready to pick up Monday? Also on a side note I told him to put in a 24000 GVW transmission cooler and he told me he had a 19000 GVW and it was not necessary to do the 24000 it seems like everything I want he tells me is overkill any feedback on this as well would be nice.