Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Trans Cooler Install?

Old Nov 26, 2003 | 03:38 PM
  #1  
jlrz28's Avatar
Thread Starter
10 Second Fun Car
iTrader: (7)
 
Joined: Nov 2002
Posts: 2,045
Likes: 1
From: Pearland, Tx
Default Trans Cooler Install?

Where do most of you put the Transmission Cooler? Mine right now is above the air dam. Its a 15,000GVW but im thinking of putting a 24-29,000 gvw on it and was wondering who has done this and has possibly any pics to go along to show me? Feedback would be appreciated.

Thanks
Jason
Reply
Old Nov 27, 2003 | 12:37 PM
  #2  
onebadz's Avatar
TECH Fanatic
 
Joined: Aug 2003
Posts: 1,768
Likes: 0
From: Lexington, NC
Default

Mine is also right above the air dam below the radiator. Good Luck man

WeS
Reply
Old Nov 27, 2003 | 05:51 PM
  #3  
Fast SS on TNT's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2002
Posts: 1,500
Likes: 0
From: Bellevue, Nebraska
Default


This pic is looking up the front end, above the air damn, on the drivers side of the radiatior.

Here is my 28K GVW. Still trying to figure out how the hell to get the Spal fan in. I plan on taking out the bumper support, and doing a little cutting.
Reply
Old Nov 28, 2003 | 05:40 AM
  #4  
98SS Blackattack's Avatar
TECH Fanatic
 
Joined: Jun 2002
Posts: 1,227
Likes: 0
From: Indianapolis
Default

Originally Posted by Fast SS on TNT

This pic is looking up the front end, above the air damn, on the drivers side of the radiatior.

Here is my 28K GVW. Still trying to figure out how the hell to get the Spal fan in. I plan on taking out the bumper support, and doing a little cutting.
Mine is just like that,but on the pass. side
Reply
Old Nov 30, 2003 | 05:08 PM
  #5  
highgear's Avatar
TECH Enthusiast
 
Joined: Jan 2002
Posts: 531
Likes: 0
From: Helendale, Ca (SilverLakes)
Default

My B&M cooler sits in front of the AC condenser.
Reply
Old Nov 30, 2003 | 05:59 PM
  #6  
RPM WS6's Avatar
LS1Tech Administrator
20 Year Member
Shutterbug
Community Builder
Community Influencer
iTrader: (3)
 
Joined: Nov 2001
Posts: 34,604
Likes: 2,508
From: Schiller Park, ILL Member: #317
Default

Originally Posted by 98SS Blackattack
Mine is just like that,but on the pass. side
I too used the same style of mounting, on the pass side as well, only with the lines coming out the bottom rather than the top like in the pic...
Reply
Old Nov 30, 2003 | 08:46 PM
  #7  
Jorday's Avatar
10 Second Club
 
Joined: Nov 2001
Posts: 1,724
Likes: 0
From: Fenton, MI
Default

I also run that same cooler. My lines come in through the bottom.
Reply
Old Dec 1, 2003 | 01:06 PM
  #8  
BoneSS's Avatar
TECH Fanatic
iTrader: (9)
 
Joined: Nov 2003
Posts: 1,371
Likes: 0
From: Ashland, KY
Default

I have been looking into this also. What is a good cooler to get? I have been looking at the B&M 24 and 28, is there any difference in installation of the two also? Thanks.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:00 PM.