Getting rid of my T56... Yank, TCI or Circle-D???
#23
12 Second Club
iTrader: (17)
Join Date: Dec 2004
Location: Cooper City, FL
Posts: 1,449
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
how about a bolt together from the fti guys!!!
https://ls1tech.com/forums/automatic...converter.html
we also make weld together as well!!
Greg
https://ls1tech.com/forums/automatic...converter.html
we also make weld together as well!!
Greg
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Chad
#24
"All Motor 9 Second club member"
iTrader: (60)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Man my set up and yours is very similiar. I tried 3 different converters before I found one that showed the potential of my iron block 408. I blew through 2 from a very popular converter builder here and then I went with the Circle D 5 C. We had a Circle D 4L60E at the time and it put down 1.29 60fts on motor. It hauled the mail like it was designed to do.
Save your self some $$ and headaches and do it right the first time.
That FLT tranny and a Circle D will be an excellent match for your engine and the power it puts out.
We now run a Circle D Powerglide and a Circle 230mm race converter. It has gone 1.29s with our 445 stroker with the soft hitting 1.80 1st gear and 4.11 rear gears.
G/L
Save your self some $$ and headaches and do it right the first time.
That FLT tranny and a Circle D will be an excellent match for your engine and the power it puts out.
We now run a Circle D Powerglide and a Circle 230mm race converter. It has gone 1.29s with our 445 stroker with the soft hitting 1.80 1st gear and 4.11 rear gears.
G/L
#26
Restricted User
Thread Starter
iTrader: (43)
Join Date: Nov 2001
Location: Pittsburgh, PA
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Man my set up and yours is very similiar. I tried 3 different converters before I found one that showed the potential of my iron block 408. I blew through 2 from a very popular converter builder here and then I went with the Circle D 5 C. We had a Circle D 4L60E at the time and it put down 1.29 60fts on motor. It hauled the mail like it was designed to do.
Save your self some $$ and headaches and do it right the first time.
That FLT tranny and a Circle D will be an excellent match for your engine and the power it puts out.
We now run a Circle D Powerglide and a Circle 230mm race converter. It has gone 1.29s with our 445 stroker with the soft hitting 1.80 1st gear and 4.11 rear gears.
G/L
Save your self some $$ and headaches and do it right the first time.
That FLT tranny and a Circle D will be an excellent match for your engine and the power it puts out.
We now run a Circle D Powerglide and a Circle 230mm race converter. It has gone 1.29s with our 445 stroker with the soft hitting 1.80 1st gear and 4.11 rear gears.
G/L
![Angel](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_angel.gif)
3600, 4400, 5c, automatic, circle, converters, cost, dconverters, speed, stall, t56, tci, transmission, transmissions, yank