Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

No WOT Downshift from 3rd

Thread Tools
 
Search this Thread
 
Old Dec 17, 2003 | 08:21 AM
  #1  
SS891's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Aug 2003
Posts: 31
Likes: 0
Default No WOT Downshift from 3rd

I installed the GM hotcam over a weekend a couple of weeks ago. Install went well. Installed the new Predator tune from James at RWTD. Ever since that weekend, I have a issue that I can not come up with an answer on. (99 SS a4)

From a stop, 1/4 accel, vehicle shifts rapidly 1,2,3 before 30mph, then If i go WOT, vehicle stays in 3rd for about 3 seconds Then it will jump into 2nd. After doing some logging of this event,
The only thing i saw was 4.3 volts at tps, 26mph in 4th gear at 1350 rpms. Stays this way for about 9 frames, then finally goes into second gear. No getting any slippage, feels like a M6 in 6th gear at 40 mph when you go WOT, just boggs down.

This also happens with a stock tune. Seems like it happens more if im in drive and not Overdrive, but i wouldnt think that would matter...

any ideas?
Reply
Old Dec 18, 2003 | 10:26 AM
  #2  
SS891's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Aug 2003
Posts: 31
Likes: 0
Default

Originally Posted by SS891
I installed the GM hotcam over a weekend a couple of weeks ago. Install went well. Installed the new Predator tune from James at RWTD. Ever since that weekend, I have a issue that I can not come up with an answer on. (99 SS a4)

From a stop, 1/4 accel, vehicle shifts rapidly 1,2,3 before 30mph, then If i go WOT, vehicle stays in 3rd for about 3 seconds Then it will jump into 2nd. After doing some logging of this event,
The only thing i saw was 4.3 volts at tps, 26mph in 4th gear at 1350 rpms. Stays this way for about 9 frames, then finally goes into second gear. No getting any slippage, feels like a M6 in 6th gear at 40 mph when you go WOT, just boggs down.

This also happens with a stock tune. Seems like it happens more if im in drive and not Overdrive, but i wouldnt think that would matter...

any ideas?

bumpity bump
Reply
Old Dec 19, 2003 | 08:51 AM
  #3  
Derek98z's Avatar
12 Second Club
iTrader: (55)
 
Joined: Jul 2002
Posts: 1,783
Likes: 0
From: Raymore, MO
Default

Only changes were cam and tune? Sounds like the shift map is wrong.
Reply
Old Dec 29, 2003 | 01:53 PM
  #4  
SS891's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Aug 2003
Posts: 31
Likes: 0
Default

Well.. im still having this battle. I have replaced the PCM, TPS cleaned the MAF.. Still have the same problem.

Reply




All times are GMT -5. The time now is 03:07 AM.