Need help so i can order the right parts.
#1
Need help so i can order the right parts.
Motor is a 5.3 from a 2004 chevy tahoe. Engine had 30k miles when removed.
Mods......
Nelson Performance 226/228 588/588 112 Custom cam(installed)
Compcam 7.4 push rods(installed)
Comp cam 918 valve springs(not installed
Ls1 intake manifold
Ls1 fuel rails
Ls1 Injector covers
Ls1 ported Throttle body
Ls1 28lb injectors
.
I have a 2000 tahoe limited and it drives like a damn champ. at 60mph in overdrive at sit at 1500rpms on the highway and thats the same setup i would like for my truck.Im gonna need a good stall and matching gears i know that. bad thing is i dont know jack about gears or stalls. I was told the transmission is a 4l60e but it might need to get beefed up a bit. i was wondering what parts of the transmission needs to get beefed up and will it bolt up straight to my motor?
Plan on ordering all my parts next week so i can get my 89 s10 back on the road.
Mods......
Nelson Performance 226/228 588/588 112 Custom cam(installed)
Compcam 7.4 push rods(installed)
Comp cam 918 valve springs(not installed
Ls1 intake manifold
Ls1 fuel rails
Ls1 Injector covers
Ls1 ported Throttle body
Ls1 28lb injectors
.
I have a 2000 tahoe limited and it drives like a damn champ. at 60mph in overdrive at sit at 1500rpms on the highway and thats the same setup i would like for my truck.Im gonna need a good stall and matching gears i know that. bad thing is i dont know jack about gears or stalls. I was told the transmission is a 4l60e but it might need to get beefed up a bit. i was wondering what parts of the transmission needs to get beefed up and will it bolt up straight to my motor?
Plan on ordering all my parts next week so i can get my 89 s10 back on the road.