tallreyes

iTrader: (2)

what would an improperly installed band do in a 4l60e. car had lost all gears except first and reverse. decided to pull it apart myself and when i pulled the pump off the band was already lose. could that be my problem? also need to know how to properly install it? any help or advise is appreciated

quick346

iTrader: (4)

the second gear band is apllied in second and overdrive. plus when you pull the pump out the input shaft is not supported so the band will be loose.

tallreyes

iTrader: (2)

ok thanks for the input any suggestions on what too look for? anyhthing you think that would cause that problem again thanks for the input

7th Darkness

iTrader: (15)

This is what a bad band will do...



Check this out for more..

https://ls1tech.com/forums/automatic...lots-pics.html

tallreyes

iTrader: (2)

my reverse input looks the same way would that cause my trans to not shift out of first gear?

tallreyes

iTrader: (2)

do i need to replace the reverse input drum and the band or just the band?

02 BLK WS6

iTrader: (11)

replace both

tallreyes

iTrader: (2)

thanks would that cause my car not to shift out of first? do you know by chance

tallreyes

iTrader: (2)

ok my reverse input looks the same as the pis above except it did not expand do i still replace it?