What Stall ??
#22
On The Tree
iTrader: (3)
Join Date: Dec 2009
Location: Keystone Heights FL
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a 3600 FTI and I love it. I drive the car daily now (my truck died). I think I could have went bigger. The car is a monster when I get into it and when I drive normal
you really can not tell it is not stock. I will take anyone for a ride who lives close to me.
Everyone has there opinions but call the manufactures and see what they say. I liked Greg and what he had to say so I bought FTI. Start with the sponsers you do not have to use them but we do have some good ones here.
you really can not tell it is not stock. I will take anyone for a ride who lives close to me.
Everyone has there opinions but call the manufactures and see what they say. I liked Greg and what he had to say so I bought FTI. Start with the sponsers you do not have to use them but we do have some good ones here.
#23
On The Tree
Thread Starter
Join Date: Mar 2008
Location: Fort Worth , TX
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Twitchtwice what was your experience on street tires haha ? I will be on street tires with my set up . I keep wanting to go a little bigger hearing everyone say they have 3600 + .... I spoke with a local converter builder and may go 3400 ....
#24
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am running a Yank SS3200 and i have had no issues but i am running 3.73 gears in the back and I can still get 24.75mpg on the high way at 75ish mph. I do have a cam as well but my car runs and drives like a stock car until you floor it...![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
oh and i do much better times then i have in my sig
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
oh and i do much better times then i have in my sig
#26
TECH Enthusiast
iTrader: (1)
Join Date: Sep 2007
Location: Barboursville, WV
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
2000nhraformula...how are you getting mpg's like that? I don't know anyone with an auto ls1 with any gear (besides maybe 2.73's) that gets more than 21-22 TOPS on the highway from a stock car.
#28
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I dont know really how but its a good cam in the car(392hp tires) and i was running around 75mph i checked it 2 times cause i didnt believe it myself but it did it on the way there and back...
#29
On The Tree
Thread Starter
Join Date: Mar 2008
Location: Fort Worth , TX
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nice mpgs for the mods ! I decided to go with a 3400 PTC . It hasn't been installed yet but hopefully I can get it in over the weekend. I am curious to see how my car reacts to it ....
#31
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Haha thanks I didnt really build it for that I am a bigger fan of 11 sec passes and driving home...but i am a fan of them
#33
On The Tree
iTrader: (17)
Join Date: May 2010
Location: NY
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Josh, did you end up getting your stall installed? I have a 2.73 car as well and was looking to get a stall in the 3200-3600 range. Just curious about the outcome and how you like the setup.
#36
On The Tree
Thread Starter
Join Date: Mar 2008
Location: Fort Worth , TX
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It's built by PTC . I am honestly not sure about the str I need find out .... It is about 3400 RPMs though. It almost seems to be a little bit higher too because the rpms flash up pretty high quickly .... I like the way it drives though and I only have 2.73 gears in the back still .
#37
LS1Tech Sponsor
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
did you deal with Kenny?
Greg
Greg
__________________
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
![](https://ls1tech.com/forums/signaturepics/sigpic99412_4.gif)