Correct bolts for flexplate to Crank
08-19-2010, 06:38 PM
#1
12 Second Club
Thread Starter
Join Date: Dec 2008
Location: Richmond,VA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Correct bolts for flexplate to Crank I have a 01 formula with a 4l60 trans and will be getting a C.A.T flexplate soon along with a circle d converter(278mm). I am tryin to find out if the ARP bolts(part#244-2901) from summit will work.
http://www.summitracing.com/parts/ARP-244-2901/
http://www.summitracing.com/parts/ARP-244-2901/
08-24-2010, 11:18 AM
#3
12 Second Club
Thread Starter
Join Date: Dec 2008
Location: Richmond,VA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Im tryin to get some bolts that are a little stronger than stock ones. I believe the flexplate is 5/16" and I dont know what the stock plate is. If the CAT plate is thicker wouldnt I need longer bolts.
