What trans.cooler?
12-30-2010, 11:18 AM
#1
Staging Lane
Thread Starter
Join Date: Feb 2009
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
What trans.cooler? OK guys, I've decided on my new trans. and 3600 stall, so now I need to know what cooler you guys are running to keep temps. under control. Any brand better than others? Any fit better? Thanks in advance. Post up what you are running and where's the best place to get em.
12-30-2010, 02:56 PM
#4
Restricted User
iTrader: (12)
Join Date: Feb 2010
Location: kansas
Posts: 1,794
Likes: 0
Received 0 Likes
on
0 Posts
http://www.summitracing.com/parts/BMM-70264/
That one is the one I just installed. It comes with the kit and makes the install easy. It will work good for ur 3600 converter. I am going to be using it with my 3400 stall and it is a very common cooler peope use
That one is the one I just installed. It comes with the kit and makes the install easy. It will work good for ur 3600 converter. I am going to be using it with my 3400 stall and it is a very common cooler peope use
12-31-2010, 01:54 AM
#7
Restricted User
iTrader: (12)
Join Date: Feb 2010
Location: kansas
Posts: 1,794
Likes: 0
Received 0 Likes
on
0 Posts
I have the b&m 14400 btu. Highest temps iv seen was in 180s after beating on it a little and sitting still afterward in drive through. But this is with the stock stall. Also, those temps were not even taken in the middle of hot summer. So I maybe looking to another setup after the higher speed stall goes in idk yet. But in this 30 degree weather temps were 130s mostly. Now the car is in hibernation lol. Cant wait for spring 
Like I said ..."get the biggest one you can fit" which should be AT LEAST the size I have and you should be good
Like I said ..."get the biggest one you can fit" which should be AT LEAST the size I have and you should be good
Trending Topics
01-01-2011, 11:24 AM
#17
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,240
Likes: 0
Received 79 Likes
on
70 Posts
Nope, see below
He is right
It is big, I wouldn't recommend it for anyone running the Fast Toys set-up. There just isn't enough room in front of the radiator.
He is right
It is big, I wouldn't recommend it for anyone running the Fast Toys set-up. There just isn't enough room in front of the radiator.
01-01-2011, 11:52 AM
#18
Staging Lane
Thread Starter
Join Date: Feb 2009
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Yea the guys at RPM reccomend the 70297, but I was just wondering where to mount. Does the fan push or pull? Just wondering if it would be workin against the radiator fans if mounted in front of rad. I don't know if I'll go with it if I can get by with the smaller one dope-style and still cool adequately. Any thoughts?
