Help Funky Sound from TQ Converter
Thread Starter
Joined: Jun 2002
Posts: 2,062
Likes: 1
From: L-Town N.Y.
Help Funky Sound from TQ Converter Hey guys
I have a funky sound in my tq converter. When I put the car up on thelift is sounded like there is a bolt or something flying around in the converter. Everything is working fine stalls up and all. I checked the fluid and it is perfect too.
Any ideas? anyone ever hear of anything like this?
I have a Vig 4000 multi disc converter
I have a funky sound in my tq converter. When I put the car up on thelift is sounded like there is a bolt or something flying around in the converter. Everything is working fine stalls up and all. I checked the fluid and it is perfect too.
Any ideas? anyone ever hear of anything like this?
I have a Vig 4000 multi disc converter
Thread Starter
Joined: Jun 2002
Posts: 2,062
Likes: 1
From: L-Town N.Y.
Originally Posted by jimmyblue
Or your POS late-model flexplate has cracked a web,
as others have.
as others have.
I could ony hope it was the flywheel.
Pull the window cover on the bell houseing and look to see if you had a converter bolt to back out. I threw 2 of them one day on the dyno and it was a scarey sight lol. If it is then it will be easy to put back in since the tranny can be put into N and roll the converter until you have checked them all or replaced them. If it's not that then you might have cracked the flexplate.
