LeanPocket

iTrader: (6)

I'm going to put in new ATF this weekend, what should I purchase? Obviously I want the good stuff, so what do you all use?

thx

parks450

iTrader: (17)

I use mobil 1 synthetic. But have used castrol before in other vehicles, both have had 0 problems

SOMbitch

iTrader: (8)

My trans builder told me to only run Dex III. IIRC Yank also recommends Dex III with their convertors..... I think the synth stuff works well with the newer trannys designed for it but would stay away with the old 60E

Keep in mind Dex IV is a synth.

LeanPocket

iTrader: (6)

Mobil 1 aye? any luck with the RP fluids?

RPM WS6

iTrader: (3)

I would skip the Mobil 1 (synthetic). Like said above, DexIII is the way I would go, brand really doesn't matter.

pancho toco loco

iTrader: (8)

I've always used MOPAR ATF +4. Its what my friend ( trans builder ) recommends and used at the time of the rebuild back in 03.

forcd ind

iTrader: (7)

i use dex 3 NAPA in my 4l80e

buddha845

iTrader: (3)

dex 3 here, but no other experiences to comment on whats good or bad lol just throwin mine in the hat

lt1-xjs

I installed my Yank over 6 years ago with Mobil 1, still the original 18 yr old trans. Yank approves Dexron VI the replacement for Dex III and it's a full synthetic.

senicalj4579

iTrader: (41)

I used 9 qts dex 6 when I installed the ss3600. I tried to get dex 3 from gm but they said they switched over to dex 6. Yank says dex 6 is fine.