So i bought a 2001 Camaro z28 roller that was a m6 car. I have 98 donor car that im taking the engine and trans from. I have a 99-02 harness coming and ECM.

So i have to
1. Swap pedals, Do i have to worry about any switches or will they plug right in?

2. I have that switch on the auto shifter, Where do I run those wires too.

3. What are you guys doing about the big hole in the trans tunnel?

I searched and went through 10+ pages of google trying to find good manual to auto swap threads.

Any comments would be great

 

read:

https://ls1tech.com/forums/automatic...sion-info.html

 

Right after i posted this thread, i found that in the sticky's...... Def good info in there.