Gears Won't Go In
06-11-2012, 08:00 PM
#42
Looked again at your vid, man I was really confused by the orientation. Clearly I'm thinking the wrong side. Not sure about that one, looks a little different than my abs. Look in the recess above where the k member bolts to the rear leg of the control arm. That is where the plug I thought that was plugs in on the drivers side. Otherwise sorry for pointing you in the wrong direction.
06-11-2012, 11:04 PM
#43
Teching In
Thread Starter
Join Date: Dec 2011
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Looked again at your vid, man I was really confused by the orientation. Clearly I'm thinking the wrong side. Not sure about that one, looks a little different than my abs. Look in the recess above where the k member bolts to the rear leg of the control arm. That is where the plug I thought that was plugs in on the drivers side. Otherwise sorry for pointing you in the wrong direction.
06-11-2012, 11:09 PM
#44
Teching In
Thread Starter
Join Date: Dec 2011
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Look HERE PLEASE Hey guys can u help me out and find out what part this is that got chipped and fucked up.. It's on video #2 (don't pay attention to the ring I removed that on purpose)
http://youtu.be/juD31vAyIvU
http://youtu.be/5RUkISklN-I
http://youtu.be/juD31vAyIvU
http://youtu.be/5RUkISklN-I
06-11-2012, 11:57 PM
#46
Teching In
Thread Starter
Join Date: Dec 2011
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
06-12-2012, 08:37 AM
#47
Moderator
Is this the part
http://www.ebay.com/itm/130580779227?redirect=mobile
http://www.ebay.com/itm/130580779227?redirect=mobile
The other questions is whether the pump housing got damaged; you should post good pictures and get advice from the pro builder here.
