Can't do a burnout???

Reply Subscribe

Thread Tools

Search this Thread

Jun 25, 2012 | 01:43 PM

00zcamarols1

Thread Starter

Teching In

Joined: Feb 2012

Posts: 10

Likes: 0

Can't do a burnout???

My transmission went out a while ago so I replaced it with a built 4l60e from monster trans, and in order to get the three year warranty I had to order a torque converter too. The torque converter that I ordered was a 1800-2000 stall that was supposed have a 400-500 RPM over stock stall speed. I got it all installed and first of all the torque converter is loose in traffic, and secondly I can't do a burnout anymore?!

Jun 25, 2012 | 01:55 PM

LS-ONE_DAY

TECH Fanatic

Joined: Jun 2007

Posts: 1,062

Likes: 2

From: Westminster, MD

Well first of all the stock converter is a 1800 stall speed so if it's 400-500 over stock then you have at least a 2200 stall rating on the new one. That low still shouldn't really make the car feel much looser if at all. Not sure about the burnout problem. I have trouble sometimes because my car just overpowers the brakes and its just bolt-ons with no tune