Cheaper 4L80e Counter-bore Slip Yoke
#1
11 Second Club
Thread Starter
iTrader: (127)
Join Date: Jun 2002
Location: MS
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Cheaper 4L80e Counter-bore Slip Yoke
Being Adamant that I was Not goin to pay $150 for a slip yoke, my searches finally paid off. My apologies to the sponsors that sell said yokes. Thought i would share my findings with other members you are not in the "Fortunate Sons" Social class. I found my slip yoke through a nonsponsor, so if you are interested, then pm me and I will send you info. The slip yoke is made by Neapco, product number N3-3-2431X (1350 yoke). The yoke is 31/32 spline, measuring 5.5 inches in length (from center ujoint to tip of yoke), with .5 inch counter-bore. Measurments match that of the bolted yoke that the 4l80e uses. Pics Below. Price was $89.75 Shipped to me!!!!!
A lot better than $150. This Yoke is comparable to Spicer brand yokes.
A lot better than $150. This Yoke is comparable to Spicer brand yokes.
#2
Launching!
iTrader: (15)
I can confirm that this yoke works and looks to be great quality. When i was searching for it i found several on ebay and other sites that had a similar number with the same dimensions but the notes did not specify if it was counterbored. These others were cheaper and possibly lower quality without the counterbore. Thanks for posting this up it was a great help to me. Im using it on my 2004 single cab Silverado with stock 1 piece driveshaft works perfectly. This is where I purchased mine for anyone else looking:
http://www.northerndrivetrain.com/pr...3-3-2431X.html
http://www.northerndrivetrain.com/pr...3-3-2431X.html