ss3600 yank not stalling ?
ss3600 yank not stalling ? Cam heads intake 4.10 gears formula ls1 car.
Has a yank ss 3600 and it's stalling at 1900ish.. Is that normal ? It's had a couple Trans with 3-4 clutches go out but idk if the converter has been flushed or not... Any insight would help
Has a yank ss 3600 and it's stalling at 1900ish.. Is that normal ? It's had a couple Trans with 3-4 clutches go out but idk if the converter has been flushed or not... Any insight would help
I would guess he is talking about foot braking it and it's only going up to 1900 RPMs...?
I would never put a converter in my car if it came out of a car with a failed trans, especially numerous times.
I would never put a converter in my car if it came out of a car with a failed trans, especially numerous times.
If the tires in question are not something at least as sticky as a 555R drag radial, I wouldn't worry about it.
As long as the converter is hitting 3600rpm or so when you stab the throttle over about half throttle I bet all is fine.
As long as the converter is hitting 3600rpm or so when you stab the throttle over about half throttle I bet all is fine.
