Cam heads intake 4.10 gears formula ls1 car.
Has a yank ss 3600 and it's stalling at 1900ish.. Is that normal ? It's had a couple Trans with 3-4 clutches go out but idk if the converter has been flushed or not... Any insight would help

 

You mean the converter is flashing at 1900 at wot?

 

I would guess he is talking about foot braking it and it's only going up to 1900 RPMs...?

I would never put a converter in my car if it came out of a car with a failed trans, especially numerous times.

 

Yeah brake stalling at 1900... Yeah it has me worried

 

What does it flash to?

1900rpm sounds tight but not completely out of the ballpark for a brake stall especially if you are just saying higher than that it turns tires over

 

Yeah it starts to turn the tires over at about 2000..

 

If the tires in question are not something at least as sticky as a 555R drag radial, I wouldn't worry about it.

As long as the converter is hitting 3600rpm or so when you stab the throttle over about half throttle I bet all is fine.