4l60e/65e need help!
Thread Starter
Teching In
Joined: Jun 2015
Posts: 24
Likes: 0
4l60e/65e need help! Okay folks looking for some help here. I put in a rebuilt transmission in my z28 along with an FTI 3200 stall. Car originally threw the p0757 and wouldn't shift into 3rd or 4th. I replaced the solenoid and now I'm still having the same result but with no ses code. I got it to go into 3rd and 4th a few times but only like twice after trying it at least 10 times. Could this be a tuning issue? Or maybe actually mechanical. Really having trouble figuring this one out. Any help would be greatly appreciated
Thread Starter
Teching In
Joined: Jun 2015
Posts: 24
Likes: 0
The last transmission I believe burned up the clutches so I lost 3rd and 4th so when it shifted out of second it felt like it went into neutral. Now it just stays in second and doesn't try to shift out. I'm not very familiar with the different types of scanners but could you direct me to one that shows live data?
TECH Fanatic
Joined: Jan 2015
Posts: 1,114
Likes: 33
From: Fort Worth, Texas
The last transmission I believe burned up the clutches so I lost 3rd and 4th so when it shifted out of second it felt like it went into neutral. Now it just stays in second and doesn't try to shift out. I'm not very familiar with the different types of scanners but could you direct me to one that shows live data?
The trans did have 3rd & 4th before the 3-4 meltdown?
