When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I've decided to upgrade my tranny. I'm replacing the direct drum with the stronger 4l80 drum with the good sprag. I'm also running a Tbrake so I need the bleed hole behind the piston. The drum has what looks to be a bleed hole already, is this really what it looks to be here in this pic? Was tired of short shifting to be easy on the roller clutch.
I did the same as you wth the 80e drum/sprag and drilled a second as per my instructions
Yea, I went ahead and pulled the piston and drilled another hole. Was just trying to avoid pulling the piston, but as it turns out....I cant use that piston anyway.
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.
Upgrading my th400 
