Do I put the shifter in d3...d2...or d1 drag racing
#1
Do I put the shifter in d3...d2...or d1 drag racing
I'm not sure what to do with my new LS3 I have the 4 L 80e. transmission at the racetrack or drag racing around the street do I start off in D1 D2 or D3 if I start a D1 do I just shift up and RPM I want any help would be appreciated thank you
#4
If the computer is set at the right shift points, then leave it in drive. If you do not want to go inside the transmission right now, then adding the TransGo HD2 Shift kit will help with the 3rd gear clutch to live much longer by the Shift kit increasing the holding of 3rd gear by apx. 300%. This is the weak point in the stock 4L80E. If you are going to rebuild this unit, then there are other ways (if you do not use the TransGo HD2) to get the full apply of the 3rd gear clutch pack. What year transmission is in here?
Trending Topics
#8
#9
TECH Enthusiast
Join Date: Sep 2016
Location: North Jersey
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
#10
TECH Fanatic
Not from the factory, 4L60E's require a modified 2-3 shift valve along with a
valve body mod.
The 4L80E does this by design.
It's the Overrun Clutch that comes on to help support the Overdrive Roller Clutch in a 4L80E in D3. Though Sonnax does have a kit to keep the Overruns on in ALL gears but 4th......http://www.sonnax.com/parts/4496-sma...utch-valve-kit
In a modified 4L60E, The Overrun Clutch also comes on.....But to support the Forward Sprag in 1st & 2nd while the shifter is in D3.
valve body mod.
The 4L80E does this by design.
It's the Overrun Clutch that comes on to help support the Overdrive Roller Clutch in a 4L80E in D3. Though Sonnax does have a kit to keep the Overruns on in ALL gears but 4th......http://www.sonnax.com/parts/4496-sma...utch-valve-kit
In a modified 4L60E, The Overrun Clutch also comes on.....But to support the Forward Sprag in 1st & 2nd while the shifter is in D3.
#12
TECH Fanatic
This is probably more suited to heavy duty applications, Creates new possible leak points.
#13
Restricted User
The 80e in my Nova took a crap on the strip a few months ago.
I had it in Drive (D4) and launched. I spun when it shifted into 2nd. I let out and got back in it. I think that it had upshifted to 3rd or 4th when I lifted because I was doing 65 at the top of 1st, and then downshifted hard into 2nd when I got back into it. It acted like it was in neutral in 2nd. It had been acting strange on the street for a few weeks, slipping on the 3-2 shift but I assumed it was tire spin.
Now the trans will not move forward in Drive (D4). If I put it in D3, it will drive first 3 gears OK. It also doesn't have reverse.
Stock 80e with transgo HD2 at ~800whp with 150k miles and 2 years of heavy abuse. Now I'm having trouble finding someone to do a mild performance rebuild on it for a decent price.
I had it in Drive (D4) and launched. I spun when it shifted into 2nd. I let out and got back in it. I think that it had upshifted to 3rd or 4th when I lifted because I was doing 65 at the top of 1st, and then downshifted hard into 2nd when I got back into it. It acted like it was in neutral in 2nd. It had been acting strange on the street for a few weeks, slipping on the 3-2 shift but I assumed it was tire spin.
Now the trans will not move forward in Drive (D4). If I put it in D3, it will drive first 3 gears OK. It also doesn't have reverse.
Stock 80e with transgo HD2 at ~800whp with 150k miles and 2 years of heavy abuse. Now I'm having trouble finding someone to do a mild performance rebuild on it for a decent price.