4l60e installed shift kit
Thread Starter
Registered User
Joined: Mar 2019
Posts: 4
Likes: 0
From: Georgia
4l60e installed shift kit Hey I recently installed a shift kit in my 4l60e on a 2003 Chevy Silverado. When I was finished my transmission has reverse neutral and drive but will not come outta first gear. Now prior to installing this shift kit I had my truck detailed and asked them to clean under it good and about a quart of water got into my transmission and had a bent spring inside the valve body causeibg it not to be able to shift outta 2nd. And suggestions or tips?
So are you saying you can move the shift lever through all positions but When you try to drive normally it won't shift from 1st to second?
In that case recheck everything that was done during the shift kit installation.
In that case recheck everything that was done during the shift kit installation.
Thread Starter
Registered User
Joined: Mar 2019
Posts: 4
Likes: 0
From: Georgia
I’ve did that already checked all valve and piston slots everything is in place 1-2 accumulator seems to be working properly. When the water got inside of it then it started not shifting outta 2nd gear so when I took the valve body out and found the bent spring I assumed that was in so I installed a shift kit seems how I needed a new spring but even after that it’s still not shifting outta 2nd gear but I can run the shifter thru all gears
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
