Quick Connect Trans Line Fitting failure........
TECH Junkie
Joined: Dec 2012
Posts: 3,615
Likes: 1,327
From: Iowa
Why has this thread turned into such a **** show.
Whining about "parts guys" and having multiple paragraphs about it.
WAY over complicated explanations for some damn quick connects
Just shove the freaking line in...ALL THE WAY...and drive the car.
Somebody close this thread
Whining about "parts guys" and having multiple paragraphs about it.
WAY over complicated explanations for some damn quick connects
Just shove the freaking line in...ALL THE WAY...and drive the car.
Somebody close this thread
Thread Starter
Teching In
Joined: Mar 2016
Posts: 10
Likes: 0
On The Tree
Joined: Feb 2013
Posts: 183
Likes: 7
Like you, it starts smoking when fluid comes out and gets on the exhaust.
Trust us, it wasn’t popped in all the way. It happens to the best of us.
That line is such a weird angle because of the servo that you may have thought you had it in but it was just in there enough.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Junkie
Joined: Nov 2013
Posts: 3,913
Likes: 366
From: White Bear, Mn
Well he's right.... some of these guys are sensitive AF.
These guys put in lots of time here and put things point blank..... and the info they share is free I must add.
Imo this site is lucky to have guys like them. It's the best site for automatic transmission responses due to these guys. If people don't like the way they word things then good luck getting that kind of help and info somewhere else.
These guys put in lots of time here and put things point blank..... and the info they share is free I must add.
Imo this site is lucky to have guys like them. It's the best site for automatic transmission responses due to these guys. If people don't like the way they word things then good luck getting that kind of help and info somewhere else.
Originally Posted by MaroonMonsterLS1
Why has this thread turned into such a **** show.
Whining about "parts guys" and having multiple paragraphs about it.
WAY over complicated explanations for some damn quick connects
Just shove the freaking line in...ALL THE WAY...and drive the car.
Somebody close this thread
Whining about "parts guys" and having multiple paragraphs about it.
WAY over complicated explanations for some damn quick connects
Just shove the freaking line in...ALL THE WAY...and drive the car.
Somebody close this thread
You and the frigging man! Thx for that. I never could find them.
Thread Starter
Teching In
Joined: Mar 2016
Posts: 10
Likes: 0
THANK YOU TO EVERYONE WHO REPLIED. I REALLY APPRECIATE THE HELP. I’ll keep you guys posted as to how it goes. I’m going to get under the car this weekend and see if I can get to it. I might have to drop the exhaust down. Fingers crossed.
TECH Junkie
Joined: Jun 2008
Posts: 3,202
Likes: 1,390
From: Nitro Alley
To any of you who believe that those plastic covers do anything other than keep debris from interfering with the actual retaining mechanism...
I pray that the children and our future generations of people are not drinking the same water that all of ya'll are!
Have a nice day!
