Pistol Grip Shift Knob
Thread Starter
Teching In
Joined: Sep 2022
Posts: 5
Likes: 0
Pistol Grip Shift **** My 2000 z28 has an automatic transmission with the stock shifter, that has the button on top of the shifter. Does anyone make a pistol grip/hurst looking shifter that is a direct swap for these?
Thanks guys.
Thanks guys.
Teching In
Joined: Sep 2022
Posts: 22
Likes: 2
From: Nigeria-Turkey
You could delete the lock and run a shifter with no button or if you want to maintain the button i have a hummer h3 with a similar shifter locking system so I got a Chinese pistol grip drilled through it from the bottom with the diameter of the shifter rod then drilled through the top with the diameter of the locking rod that gets pressed by the button and threw in a nice wooden top piece for it to look more factory made. I wasn’t satisfied with the look tho so ended up buying a better quality shift **** but couldn’t muster up drilling through a more expensive **** so I placed a motorcycle clutch lever around the shift rod that pulls the locking pins down. Sadly I haven’t seen many options other than the one made by hurst and unfortunately can’t get that one shipped to my corner of the world
TECH Junkie
Joined: Dec 2012
Posts: 3,614
Likes: 1,326
From: Iowa
I've used this Sick speed adapter and this hurst stick for a couple years now .
Bit of a pain to cut down the shifter rod and lockout stick, but not too bad to install really.
When you get this installed, you just have to move the whole shifter as if it's the button. You "press" the whole handle down instead of just the button on top. and that lets you out of park, etc
https://www.sickspeed.com/products/b...d6d77081&_ss=r
https://www.holley.com/products/driv.../parts/1536210
and here's an old thread to help walk you through it
https://camaroforums.com/forum/93-02...-1995-a-72666/
Bit of a pain to cut down the shifter rod and lockout stick, but not too bad to install really.
When you get this installed, you just have to move the whole shifter as if it's the button. You "press" the whole handle down instead of just the button on top. and that lets you out of park, etc
https://www.sickspeed.com/products/b...d6d77081&_ss=r
https://www.holley.com/products/driv.../parts/1536210
and here's an old thread to help walk you through it
https://camaroforums.com/forum/93-02...-1995-a-72666/
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
