Th350 is in & it works!

Reply Subscribe

Thread Tools

Search this Thread

Feb 26, 2005 | 08:35 PM

Orange Crush 408

Thread Starter

On The Tree

iTrader: (-2)

Joined: Oct 2004

Posts: 191

Likes: 0

From: amarillo,tx

Th350 is in & it works!

It is awesome, very traction limited even with the spohn chassis mount torque arm. I must do some adjustments, but damn I love it. Too bad I am selling the car. This thing is wild.

Feb 28, 2005 | 11:27 PM

NosboySS

On The Tree

iTrader: (1)

Joined: Dec 2001

Posts: 128

Likes: 0

What shifter did you use? Im doing a similar setup with the reverse manual, but I cant figure out which shifter to go with??

Mar 1, 2005 | 12:32 AM

SpdfreakLS1

On The Tree

iTrader: (2)

Joined: Dec 2002

Posts: 141

Likes: 0

From: Sacramento

Yeah Nossboy and I are both doing t-350's. he got a badass tranny with the speedo stuff in, and the dipstick too (you ******!) where and what do i need to buy to make the speedo work? thanks!

Mar 1, 2005 | 09:04 PM

1QuickT-A

10 Second Club

iTrader: (12)

Joined: Dec 2004

Posts: 2,034

Likes: 0

From: Birmingham, Alabama

yeah i'll be doing a turbo 350 swap in the next few weeks.. already have a nicely built tranny with transbrake and reverse manual valve body. waitin on the torque converter right now. i would also like to know what to buy for the speedo to work..

Mar 3, 2005 | 06:10 PM

99'Formula

TECH Regular

iTrader: (7)

Joined: Mar 2004

Posts: 438

Likes: 0

From: Fort Worth, TX

Quote:

Originally Posted by NosboySS

What shifter did you use? Im doing a similar setup with the reverse manual, but I cant figure out which shifter to go with??

B&M Pro Ratchet if you have a m6 consel. It fits under the boot like it was meant to be there. I don't no about a auto consel.
Ike

Mar 4, 2005 | 06:29 AM

tuff

8 SEC SLOPPY SHOT!!!

iTrader: (15)

Joined: Oct 2002

Posts: 1,862

Likes: 0

From: lombard,IL

Quote:

Originally Posted by SpdfreakLS1

Yeah Nossboy and I are both doing t-350's. he got a badass tranny with the speedo stuff in, and the dipstick too (you ******!) where and what do i need to buy to make the speedo work? thanks!

If you have the tailshaft housing with a 2in speedo hole i can give you the part numbers to what you will need.Im going through the same prosess of putting in a turbo 350.