TH400 Cheetah Shifter pic you guys have been wanting!
#1
Launching!
Thread Starter
Join Date: Nov 2001
Location: Laurel, Md
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![](http://www.planetquake.com/tritin-films/azzkicker2/shifter.jpg)
Here ya go. The wire hanging off the side is for the trans brake, and the lighted switchs are for my TNT nitrous system!
#2
TECH Addict
Join Date: Nov 2001
Location: Nawf Carolina
Posts: 2,556
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That looks pretty slick man <img src="images/icons/smile.gif" border="0"> A buddy of mine has one in his 65 Polara and he likes it.
#3
Launching!
Thread Starter
Join Date: Nov 2001
Location: Laurel, Md
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks Crazy!
It works really well if you cut the hole first and then mount the shifter to fit inside. You can rig up something to mount it where ever you want but to get it centered in the console I just cut the console, and then drilled the shifter in.
It works really well if you cut the hole first and then mount the shifter to fit inside. You can rig up something to mount it where ever you want but to get it centered in the console I just cut the console, and then drilled the shifter in.
#4
Wheels up Director
iTrader: (11)
Join Date: Nov 2001
Location: Mantua, NJ
Posts: 886
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I like it <img src="images/icons/smile.gif" border="0"> Now I know what things might look like in the near future <img src="images/icons/wink.gif" border="0">
<img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
<img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
#5
On The Tree
Join Date: Nov 2001
Location: El Cajon, CA
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i like that. thats a very clean job, much better looking shifter than the b&m too.
Jeremy
[ November 22, 2001: Message edited by: ISERCASTiK ]</p>
Jeremy
[ November 22, 2001: Message edited by: ISERCASTiK ]</p>
#7
TECH Fanatic
Join Date: Nov 2001
Location: Chi-Town
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
you know i like the cheetah, but wouldn't take more time to get used to going through the "gates" than a normal ratchet shifter?
always wondered why so many people love the cheetah
always wondered why so many people love the cheetah
Trending Topics
#8
TECH Apprentice
Join Date: Nov 2001
Location: Birmingham, AL
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
People love it because the Cheetah is nearly fool-proof. Since my own race car has been under construction, I've driven several race cars with that shifter and LOVED it. I had a Pro-stick in my own race car and in the heat of racing, it wasn't too hard to go from second to neutral if you let go of the lever too soon. When my car goes back together, it WILL have a Cheetah SCS. It's not hard at all to get used to and it is well worth the admittedly high price tag, if you ask me.
#9
Launching!
Thread Starter
Join Date: Nov 2001
Location: Laurel, Md
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Kristi thats exactly why I went with it. All of the race car guys told me to get it LOL. A bunch of them had told me that they wasted money on something else and ended up getting a cheetah because of consistancy.
Thanks for the compliments guys and GIRL <img src="images/icons/grin.gif" border="0"> It did turn out better then I thought.
Thanks for the compliments guys and GIRL <img src="images/icons/grin.gif" border="0"> It did turn out better then I thought.
#10
TECH Fanatic
Join Date: Nov 2001
Location: Chi-Town
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
well i have a reverse manual valvebody so shifting into neutral most likely wont happen to me
lol
thanks for the info though, it was what i was looking for
lol
thanks for the info though, it was what i was looking for
#11
TECH Senior Member
iTrader: (6)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Man, that thing is even uglier in a picture... <img src="images/icons/wink.gif" border="0"> <img src="images/icons/grin.gif" border="0"> <img src="images/icons/grin.gif" border="0"> j/k
That is a sweet setup. Andy took the time to do it right the first time! <img src="images/icons/grin.gif" border="0">
That is a sweet setup. Andy took the time to do it right the first time! <img src="images/icons/grin.gif" border="0">
#12
TECH Enthusiast
iTrader: (5)
Join Date: Nov 2001
Location: Orlando, FL
Posts: 551
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nice install. Here's some pics of the alternative. I just got done putting this in my car. Havent installed the consoles yet but it will look TOTALLY stock after complete. No need to cut the console at all. It's a ratchet shifter. I dont see how you could miss a gear with this shifter. IMO it would perform just as well than the cheetah and you don have to worry about moving the handle side to side....just pull it back to go up a gear (reverse pattern) and push it up to go down a gear.
![](https://hometown.aol.com/tofst4u2no/hammer1.jpg)
![](https://hometown.aol.com/tofst4u2no/hammer2.jpg)
![](https://hometown.aol.com/tofst4u2no/hammer3.jpg)
L8r
Will
![](https://hometown.aol.com/tofst4u2no/hammer1.jpg)
![](https://hometown.aol.com/tofst4u2no/hammer2.jpg)
![](https://hometown.aol.com/tofst4u2no/hammer3.jpg)
L8r
Will
#13
TECH Apprentice
Join Date: Nov 2001
Location: Indianapolis, IN
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
very nice install....thing is kind of a PITA to install in the console cause of the extreme front and back motion of the shifter. We had to cut up my Camaro on pretty good to make it fit right and for the shifter to see full motion
#15
Teching In
Join Date: Nov 2001
Location: Pasadena, Maryland
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
AzzKicker,
I am now running the Cheetah with my new setup. Did you have the pictures somewhere of your install? I was searching and come across this thread and wondering what your setup looked like.
Thanks,
Tim
I am now running the Cheetah with my new setup. Did you have the pictures somewhere of your install? I was searching and come across this thread and wondering what your setup looked like.
Thanks,
Tim
#17
Teching In
Join Date: Nov 2001
Location: Pasadena, Maryland
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by WILWAXU
umm 1BadAzzGT ... look at the date on this thread!
Andy (AZZKICKER) hasn't own that car for years much less posted here![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
Andy (AZZKICKER) hasn't own that car for years much less posted here
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
#18
TECH Senior Member
iTrader: (6)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by 1BadAzzGT
Ok ... I did a search and found this thread. Whoops... my fault sorry for any inconvenience.
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
AZZKICKER was Andy Wheeler from EFA. ~3 years ago he bought Lotus and has since faded into the wood work.
Tim, you have a f-body now?
#19
Teching In
Join Date: Nov 2001
Location: Pasadena, Maryland
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by WILWAXU
No inconvenience, just don't think Andy will be reponding ![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
AZZKICKER was Andy Wheeler from EFA. ~3 years ago he bought Lotus and has since faded into the wood work.
Tim, you have a f-body now?
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
AZZKICKER was Andy Wheeler from EFA. ~3 years ago he bought Lotus and has since faded into the wood work.
Tim, you have a f-body now?
![Driving](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_driving3.gif)