custom th400 cross member-pics
#1
TECH Enthusiast
Thread Starter
Join Date: Aug 2003
Location: Downers Grove,IL
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
custom th400 cross member-pics
I built this today for my th400 conversion.Tucks away nice and is built strong and almost 4lbs lighter than a stocker. All mild steel.
It's painted black now. In the pics it is still in raw form.
Gotta love welding
Steve
It's painted black now. In the pics it is still in raw form.
Gotta love welding
Steve
#3
TECH Enthusiast
Thread Starter
Join Date: Aug 2003
Location: Downers Grove,IL
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
Thanks strokedls1.
I know there are not to many guys that fabricate on the site. But maybe these pics will help out somebody thinking about building a cross member. It's a fairly simple project.
Steve
I know there are not to many guys that fabricate on the site. But maybe these pics will help out somebody thinking about building a cross member. It's a fairly simple project.
Steve
#7
On The Tree
Join Date: Jan 2005
Location: jackassville Florida
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by S_J_H
Thanks strokedls1.
I know there are not to many guys that fabricate on the site.
Steve
I know there are not to many guys that fabricate on the site.
Steve
Trending Topics
#9
TECH Enthusiast
Thread Starter
Join Date: Aug 2003
Location: Downers Grove,IL
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
The tubing is just CREW. 1.3 OD and .133" wall thickness I believe. The plate is just 3/16" hot roll. Cheap material but plenty strong for any trans cross member.
Steve
Steve