Anyone drop in a Fuddle Racing TC yet?
05-05-2005, 08:50 PM
#1
Anyone drop in a Fuddle Racing TC yet? Just curious to see if anyone one this site had tested one yet. Just looking at getting one soon and was wondering if anyone had tested it yet. Thanks
Last edited by waterbug1999; 05-09-2005 at 06:57 PM.
05-06-2005, 12:30 AM
#3
Originally Posted by evilbadz
I ordered mine today, 3500/2.5. When I get it in in a week or so I'll let you know 
I am planning on getting mine next week.. The guy sounds descent and from what I have read and decent verter as well. Not bad at all for the price. Planning on a 3800-4000 stall with maybe a 2.6-2.7 STR. After the verter/cooler/shift kit/guage are all in its time for a nice cam and maybe some 3:73's.
Let me know as I might wait till I find out more info though.
Trending Topics
05-10-2005, 07:46 AM
#8
12 Second Club
iTrader: (8)
Join Date: Feb 2004
Location: Fawn Twp, PA
Posts: 497
Likes: 0
Received 0 Likes
on
0 Posts
I should have my car back tomorrow. I had a 3600/2.2str installed along with some 3.73's. I spoke to the driveline shop yesterday and the converter went in with no problems. I have also purchased Convo pro rims with Nitto DRs and skinnys up front so Im hoping to get some new times in my sig this summer. I will let everyone know how the converter is by the end of the week. I will have to break in the rearend before I can fully test out the TC.
05-10-2005, 12:12 PM
#9
i have mine sitting here ready to go after i finish rebuilding my tranny today.
its a very nice lookin pice i went with the 3200 2.1 str so we shall see
will let you guys know.
its a very nice lookin pice i went with the 3200 2.1 str so we shall see
will let you guys know.
05-11-2005, 02:09 AM
#11
I got it done today. I put about 100 miles or so on it and the lock up works great. Just taking off about 1/4 throttle the rpms stay right around 2900-3100. So then i did some WOT runs, the car is alot faster then before. The pull is so much hard now. I'm running 315's nitto's, before off idle hammer down it didn't spin a tire. Now off idle, if you keep it to the floor it spins on the way through first. I'm going to the track friday if we don't get rained out. Before i ran
motor n/a
60ft. 2.109
1/4 13.39
mph 104
100 shot
60ft. 2.153
1/4 12.29
mph 118.40
motor n/a
60ft. 2.109
1/4 13.39
mph 104
100 shot
60ft. 2.153
1/4 12.29
mph 118.40
05-16-2005, 12:49 AM
#14
ok, i have some new track times with fuddle 3600 2.2str converter.
before
n/a motor
60ft 2.153
1/4 mile 13.39
1/4 mph 104
now (only thing changed was converter)
run 1
n/a motor
60ft 1.690
1/4 mile 12.52
1/4 mph 106.83
run 2
n/a motor
60ft 1.70
1/4 mile 12.47
1/4 mph 107.63
This converter is well worth the money. My buddy has a yank converter and didn't pick up this much with it.
before
n/a motor
60ft 2.153
1/4 mile 13.39
1/4 mph 104
now (only thing changed was converter)
run 1
n/a motor
60ft 1.690
1/4 mile 12.52
1/4 mph 106.83
run 2
n/a motor
60ft 1.70
1/4 mile 12.47
1/4 mph 107.63
This converter is well worth the money. My buddy has a yank converter and didn't pick up this much with it.
05-16-2005, 01:02 AM
#15
Originally Posted by Monroe98SS
ok, i have some new track times with fuddle 3600 2.2str converter.
before
n/a motor
60ft 2.153
1/4 mile 13.39
1/4 mph 104
now (only thing changed was converter)
run 1
n/a motor
60ft 1.690
1/4 mile 12.52
1/4 mph 106.83
run 2
n/a motor
60ft 1.70
1/4 mile 12.47
1/4 mph 107.63
This converter is well worth the money. My buddy has a yank converter and didn't pick up this much with it.
before
n/a motor
60ft 2.153
1/4 mile 13.39
1/4 mph 104
now (only thing changed was converter)
run 1
n/a motor
60ft 1.690
1/4 mile 12.52
1/4 mph 106.83
run 2
n/a motor
60ft 1.70
1/4 mile 12.47
1/4 mph 107.63
This converter is well worth the money. My buddy has a yank converter and didn't pick up this much with it.
NICE... Thanks for the update. I had just ordered mine on Friday. I got the 4000 stall with a 2.5 STR. So, I hope i can hook up as good as you. What tires were you running?
05-16-2005, 03:19 AM
#17
Restricted User
iTrader: (9)
Join Date: Sep 2002
Location: Sierra Vista, AZ
Posts: 7,603
Likes: 0
Received 0 Likes
on
0 Posts
This is good reading, I am hopefully ordering mine Mon, or Tues, as soon as John gets back to me on a few questions. We're going with 3600 2.5 IIRC for the pending turbo to be! Cant wait.
05-18-2005, 09:44 AM
#19
just put my 3200 2.1 str in and drove it for the first time this morning.
i can not get on it yet but just idleing and driving normal all i can say is wow.
and no more high dolar vigilantes for me. well worth the money andjohn and mellisa are a big help. thanks guys. will let yall know some results when i can actualy get on it.
i can not get on it yet but just idleing and driving normal all i can say is wow.
and no more high dolar vigilantes for me. well worth the money andjohn and mellisa are a big help. thanks guys. will let yall know some results when i can actualy get on it.
05-18-2005, 10:20 AM
#20
Staging Lane
Join Date: Jan 2003
Location: N.C.
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Pardon my stupid question but what is this "2.1 str" ? I see others with different str numbers. What does it all mean? I'm starting to look into a converter but I want to know more about them. Again sorry for the newbie question