Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Tranny issues!

Thread Tools
 
Search this Thread
 
Old 11-03-2005, 08:07 PM
  #1  
11 Second Club
Thread Starter
iTrader: (8)
 
TA TECH's Avatar
 
Join Date: Aug 2004
Location: Under a hood in Alabama
Posts: 503
Likes: 0
Received 1 Like on 1 Post
Default Tranny issues!

Here's my prob First and reverse are fine!fluid level fine, no 2nd 3rd or 4th can lock each gear with hp tuners and not move its like its locked 2nd moved maybe a inch or two but had to give it alot of gas in second!Any ideas tranny guru's!
Old 11-04-2005, 10:48 AM
  #2  
11 Second Club
Thread Starter
iTrader: (8)
 
TA TECH's Avatar
 
Join Date: Aug 2004
Location: Under a hood in Alabama
Posts: 503
Likes: 0
Received 1 Like on 1 Post
Default

No one?
Old 11-04-2005, 03:06 PM
  #3  
Launching!
iTrader: (2)
 
BeachZ's Avatar
 
Join Date: Feb 2004
Posts: 254
Likes: 0
Received 0 Likes on 0 Posts
Default

Maybe first really isn't working. Maybe you really only have third and reverse, and that would mean your car's in limp mode. Do a search for limp mode and you'll see what I mean.
Old 11-05-2005, 06:29 PM
  #4  
11 Second Club
Thread Starter
iTrader: (8)
 
TA TECH's Avatar
 
Join Date: Aug 2004
Location: Under a hood in Alabama
Posts: 503
Likes: 0
Received 1 Like on 1 Post
Default

No sir no third! First is fine didn't you read I locked it with HP tuners! Plus when it is put in manual 1st its fine it will go to red line around 40ish mph!Plus codes would be in it if it was in limp mode usually! Took the pan off today and looked clean all that was in the pan was some small peices that looked like thick peices of aluminum foil. one like super small peice that was flat and had a little of a bend at the end!Guess I'll have to see what chuck says mon!Sense not to much tech is going on in the tanny section!




All times are GMT -5. The time now is 04:30 AM.